Quick-Start Guide

ManualsBrandsOklahoma Sound ManualsAudio Visual PresentationAristocrat Full-Floor Lectern #600

OKLAHOMA SOUND CORPORATION

ARISTOCRAT

Contour Floor Lectern

ASSEMBLY MANUAL

MODEL #600

OKLAHOMA SOUND CORP.

149 Entin Road, Clifton, NJ 07014

Tel: 973-594-9000• Fax: 973-594-9339

e-mail: info@oklahomasound.com

Web-Site www.oklahomasound.com

Manufacturers Warranty

Our lectern undergoes the most rigid and exacting tests

for superior quality and performance before leaving the

factory. Our lectern is made in America by American

craftsmen. Oklahoma Sound Corporation warrants this

product to be free from defective material and workman-

ship for two years from the date of resale by an autho-

rized Oklahoma Sound distributor. Oklahoma Sound will

replace defective parts and repair malfunctioning prod-

ucts under this warranty when the defect occurs under

normal installation and use, provided the unit is

returned to our factory via prepaid transportation after

direct authorization and approval by Oklahoma Sound.

This warranty provides that examination of the returned

product must disclose in our judgement, a manufactur-

ing defect. This warranty does not extend to any product

which has been subject to misuse, neglect, accident,

improper installation, or where the serial number has

been removed or defected and is given in lieu of any

other warranty implied or expressed and will not cover

any consequential damages.

Summary of content (4 pages)

PAGE 1
OKLAHOMA SOUND CORPORATION ARISTOCRAT Manufacturers Warranty Our lectern undergoes the most rigid and exacting tests for superior quality and performance before leaving the factory. Our lectern is made in America by American craftsmen. Oklahoma Sound Corporation warrants this product to be free from defective material and workmanship for two years from the date of resale by an authorized Oklahoma Sound distributor.
PAGE 2
OKLAHOMA SOUND CORPORATION Aristocrat Contour Floor Lectern • Model 600 INTRODUCTION OPTIONAL/ADDITIONAL EQUIPMENT Aristocrat Contour Floor Lectern — Model 600 BRASS READING LAMP / #BRL A perfect lectern for the most demanding, upscale look. Contoured style with radius curves. Available in four woodgrain thermofused melamine laminate on 3/4" flakeboard. Two built in shelves and side mounted slide-out shelf for A/V presentation equipment. Accented by attractive T-Mold edging.
PAGE 3
OKLAHOMA SOUND CORPORATION Aristocrat Contour Floor Lectern • Model 600 5) Now apply the left side panel to the semi assembled unit. Be sure to align the cam bolts to the holes on both the front panel & the shelf. Be sure to align the dowels. Be sure theat the “BOTTOM” is securely in groove. Tighten cams. (Diagram D) ASSEMBLY PARTS Side Panel Front Panel Side Panel Diagram D 6) Screw the Corner braces into the “SIDE PANEL” & the “FRONT PANEL”.
PAGE 4
OKLAHOMA SOUND CORPORATION Aristocrat Contour Floor Lectern • Model 600 INSTALLATION OF HARDWARE ASSEMBLY OF LECTERN 1) Lay out the wood panels as shown in diagram “A” (make sure the factory drilled holes are facing upwards). You can determine the top of the front panel by identifying the edge cut on an angle. 2) Identify the holes numbered "1" in Diagram A. Screw the bolts into the inserts with a #2 Phillips-head screwdriver. Be sure to tighten the screws all the way. P.S.