Quick-Start Guide

OKLAHOMA SOUND CORPORATION
Speaker Stand
INSTRUCTION MANUAL
MODEL #70
For this and other OSC products/accessories, please contact your dealer, or:
OKLAHOMA SOUND CORP
.
149 Entin Road,
Clifton,
NJ 07014
Tel: [phone]• Fax: [phone]
W
eb-Site www
.oklahom
asound.com • e-mail: [e-mail]
TECHNICAL SPECIFICATIONS
Steel ........................1” x 2” — 16 Guage
Reading Surface ....Medium Oak — Standard
Also in Lt. Oak, Mahogany, Walnut or Gray
Base/Pole Color......3 Mil Powdercoat Paint in Black;
Gray Pole with Gray Reading Surface
Knob ........................Plastic with Nylon Stud
Glides ......................4 Adjustable
Edge ........................5/8” PVC T-Moulding
Dimensions ..............Reading Surface 16"H x 20"W
Height Adjustable 30”— 44”H
Weight ....................18 lbs. (Oversized Carton)
MANUFACTURER’S WARRANTY
Our Lecterns undergo the most rigid and exacting tests for superior quality
and performance before leaving the factory. Oklahoma Sound Corporation
warrants this product to be free from defective material and workmanship on
the electronic product speakers and microphones for two years from the date of
resale by an authorized Oklahoma Sound distributor. Oklahoma Sound will
replace defective parts and repair malfunctioning products under this war-
ranty when the defect occurs under normal installation and use, provided the
unit is returned to our factory via prepaid transportation after direct autho-
rization and approval by Oklahoma Sound. This warranty provides that
examination of the returned product must disclose in our judgement, a man-
ufacturing defect. This warranty does not extend to any product which has
been subject to misuse, neglect, accident, improper installation, or where the
serial number has been removed or defected and is given in lieu of any other
warranty implied or expressed and will not cover any consequential damages.