Owner Manual

ManualsBrandsOklahoma Sound ManualsComputer Lab Furniture46.5" Wood Full Podium

Oklahoma Sound

OPTIONAL EQUIPMENT

Additional Units (sold separately)

MODEL #22

TABLE TOP LECTERN

This versatile, portable

table top lectern, can

be used on its own or as

a oor lectern with the

optional base (sold sepa-

rately). ⁄" stain and scratch resistance

thermofused melamine laminate on

MDF. Paper/book stop included.

Dimensions: 23¾" W x 13¾" H x 19⁄" D

Available Color Options

Medium Oak • Light Oak • Mahogany • Walnut

BRASS READING LAMP / #BRL

Attach an elegant brushed brass reading lamp

to the reading table of your new Speaker Stand.

Not only will you shed light on the subject, but

you will add pizzaz to your new stand.

For these and other OSC accessories, please contact your dealer, or:

OKLAHOMA SOUND

149 Entin Road, Clifton, NJ 07014

Tel 973-594-9000 • Fax 973-594-9339

www.oklahomasound.com • email: info@oklahomasound.com

MODEL #112

LECTERN BASE AV CART

Converts your TABLE TOP Lectern

to a FULL FLOOR Lectern or use as

an AV cart for your presentation equip-

ment. Includes shelf and four easy roll

casters with two locking.

Dimensions: 21⁄" W x 33¾" H x 17½"D

ASSEMBLY MANUAL

Full Floor Lectern

MODEL #222

Summary of content (4 pages)

PAGE 1
Oklahoma Sound optional equipment Additional Units (sold separately) Full Floor Lectern assembly Manual Model #22 table top lectern This versatile, portable table top lectern, can be used on its own or as a floor lectern with the optional base (sold separately). 5/8" stain and scratch resistance thermofused melamine laminate on MDF. Paper/book stop included. MODEL #112 Lectern Base -AV Cart Converts your TABLE TOP Lectern to a FULL FLOOR Lectern or use as an AV cart for your presentation equipment.
PAGE 2
Oklahoma Sound Full Floor Lectern: Model 222 Introduction The model #222 Full Floor Lectern is attractive and durable: this Full Floor Lectern is made of 3/4" stain resitant thermofused melamine laminate on flakeboard. Full sized reading surface, shelf and paper/book stop built in. Floor glides provided. Assembly required. Dimensions: 23"W x 46½"H x 16"D. 6) Once again go over all the cams and check to make sure the lectern is sturdy.
PAGE 3
Oklahoma Sound Full Floor Lectern: Model 222 3) Now apply the left side Panel C to the semi assembled unit. Be sure to align the cam bolts to the holes on both the front Panel B and the shelf Panel E. Tighten cams (Diagram D). Assembly Instructions Assembly Tips • Do not use a sharp instrument such as a knife or screwdriver to open the packaging, as this may scratch or damage the unit • All assembly should be done on a clean protected surface such as carpet or the like.
PAGE 4
Oklahoma Sound Full Floor Lectern: Model 222 Installation of Hardware Assembly of lectern 1) Lay out the wood panels as shown in Diagram A (make sure the factory drilled holes are facing upwards). You can determine the top of the front panel by identifying the edge cut on an angle. 2) Identify the holes numbered "1" in Diagram A. Screw the bolts into the inserts with the #2 Phillips head screwdriver. Be sure to tighten the screws all the way.