Owner Manual
Oklahoma Sound
FULL FLOOR LECTERN: Model 222
6 3
3) Now apply the left side Panel C to the semi assembled unit. Be
sure to align the cam bolts to the holes on both the front
Panel B and the shelf Panel E. Tighten cams (Diagram D).
4) Stand the lectern up. Taking the reading surface Panel D of the
lectern with the 4 installed cam-bolts facing down (the book
stop will be facing up), align bolts with holes on the top edges.
Once they are in place apply gentle pressure on the reading
surface until it lies at on all of the top edges, then tighten cams
(Diagram E).
ASSEMBLY INSTRUCTIONS
Assembly Tips
• Do not use a sharp instrument such as a knife or screwdriver to
open the packaging, as this may scratch or damage the unit
• All assembly should be done on a clean protected surface
such as carpet or the like.
• Make sure that you have all the required parts. (A list of all
the parts is listed below.)
• Read the instructions carefully and follow the diagrams to
ensure an easy and correct assembly.
Tools Required
#2 Phillips Head Screwdriver
Hammer
Parts
14 Cams...............
14 Cam Bolts ..............................
4 Platic Glides .........
1 Front Panel
1 Right Panel
1 Left Panel
1 Shelf
1 Reading Surface
(can be identied by bookstop
which is already installed)
Example of Cam Lock Assembly
Diagram "D"
Diagram "E"