User manual

RASPBERRY CASE PI B+RASPBERRY CASE PI B+
Manufacturer
Odenwälder Kunststoffwerke
Gehäusesysteme GmbH
Friedrich-List-Str. 3
74722 Buchen / Germany
Tel. [phone] / 4 04-00
Fax [phone] / 4 04-144
E-Mail [e-mail]
Web www.okw.com
ONE-PIECE ENCLOSURE FOR RASPBERRY PI B+
RASPBERRY-CASE PI B+
5
Just fold up the long sides first, then the
short sides, and snap on the cover. The
mini-computer is ready for use. There
are slots in the base for ventilation and
holes drilled for optional wall mounting.
Being made of translucent polypropylene
materials – in mint green and raspberry
– the LEDs on the boards can easily
be read. To dismantle the box, proceed
in the reverse order. Any necessary
adjustment work, or the connection of
external units, can be effected quickly
and without tools.
Raspberry Pi, a success story. The idea
behind this was to provide pupils and
students with a single-board computer
for their first programming exercises
– cheap but of high value at the same
time.
The unusual enclosure for the Raspberry
board focuses on the original idea –
simple and low-cost. The enclosure
consists of one single part and can be
assembled very easily and quickly. The
board is simply placed in the enclosure,
and may be fixed with screws.
Turtle © by OKW Gehäusesysteme, Buchen. Subject to
technical modifi cation without notice. Typographical and
other errors do not justify any claim for damages. 01.2015.