Installation Guide

Storage Unit – Product Submission
Step 1
Place Planter Wall in all 4 corners to your
measurements.
Step 4:
Measure for your desired lid size.
Step 5:
Use measurement for lid to cut planks to size and fasten 3- 2”x4” supports making sure they are centered and don’t interfere with closing of the lid.
Step 6:
Screws handle to face of lid to assist you with finishing build.
Step 7:
With lid standing on edge, screw the hinges in between supports.
Step 2
Insert all three tiers of boards in front &
back.
Step 3
Insert all three tiers of boards on both
sides.
Step 4
Measure for your desired lid size.
Step 6
Screws handle to face of lid to assist
you with finishing build.
Step 5:
Cut planks to size and fasten 3- 2”x4”
supports making sure they are centered
and don’t interfere with closing of the lid.
Step 7
Screw the hinges in-between supports.
ITEM NO. Item QTY.
1
SKU: 1001571811
12
2
2 in. x 6 in. x 8 ft. Lumber
4
3
1 in. x 6 in. x 8 ft. Lumber
3
4
2 in. x 4 in. x 8 ft. Lumber
1
5
Heavy Duty Tee Hinge
2
6
Light Duty Door Pull
1
7
Wood Screws
(12 pack) 2