Use and Care Manual

STEP 1: Remove the 6 preinstalled bolts (C) from the cross posts (F).

STEP 2: Arrange leg post (D), U bar (E),

and cross post (F). Cross post (F) should be

attached to the hole furthest away from the

black end cap on leg post (D).

See Fig. 1

STEP 3: Build the other side of the cart using leg

post (D) and 2 cross posts (F) into the same

shape as in Step 2.

STEP 4: Connect each side of the cart frame

together with the final cross post (F), secure cross

post to legs (D) using bolts (c).

STEP 5: Place washer (b) between the wheel and U bar (E), insert bolt

(a) through tire, place washer (b) on the other end of the bolt. Repeat

for the remaining tire.

STEP 6: Insert a screw driver through the hole on

tool (I) and twist to tighten. If the wheels do not

spin, loosen the bolts slightly. See Fig. 2.

COTTON CANDY CART ASSEMBLY

Fig. 1

Fig. 2