Use and Care Manual

Page | 10
Initial Setup Instructions
1. Set popcorn popper on a level, dry surface. Gently squeeze the sides of the Olde Midway
front metal panel to detach, then remove all packing material and wipe inside of kettle and
popper with a dry cloth. (Fig. 1) DO NOT use harsh cleaners or abrasive chemicals. After the
initial setup, maintain a regular care and maintenance plan.
2. Hang KETTLE on the hook assembly (Fig. 2), securely seating and flush with the gears. Note:
Kettle roller arm should be facing the popcorn machine door.
3. Connect the power plug from the main unit's ceiling with the socket on the bottom of the
kettle.
4. Slide the door posts into the hinge holes attached to the unit's frame.
Controls Accessories
WARM: Turns the warming light on an off.
STIR: Automatically stirs the kettle.
KETTLE: Turns the kettle on an off.
Salt 1 Tbsp Kernel Popcorn
Shaker Measure Scoop Scoop
Fig. 1
Fig. 2