Installation Guide

NEW

EASY INSTALL!

ONE BALUSTER FITS ALL

Adjustable Wrought Iron Balusters

Perfect do-it-yourself

install!

• Easy transition from traditional

wood stair case to wrought iron

by replacing the balusters

• Install with 3 screws

• Already painted –

No ﬁnish required

• 4 designs to

choose from

• Available in 2

different ﬁnishes

Moulding to Your Lifestyle

Installation

Guide on

reverse

SWIVEL TOP

Adjusts to any

stair angle –

90 degrees both

directions

TELESCOPIC

SHAFT

Extends from

30-1/4” to 38”

in height

4144_ALEX_WroughtIronAdjustableBaluster_PromoSheet_EN_v7.indd 1 21/10/09 5:17 PM

PAGE 1
EW N Adjustable Wrought Iron Balusters EASY INSTALL! ONE BALUSTER FITS ALL SwivEl top Adjusts to any stair angle – 90 degrees both directions Telescopic shaft Extends from 30-1/4” to 38” in height Perfect do-it-yourself install! • Easy transition from traditional wood stair case to wrought iron by replacing the balusters • Install with 3 screws • Already painted – No finish required • 4 designs to choose from • Available in 2 different finishes tion Installa on Guide reverse Moulding to Your Li
PAGE 2
Installation guide for existing staircases Step 1 Apply masking tape to side of handrail and treads to help mark existing balusters center. Step 2 Use a level to mark existing balusters center at the top and the bottom. Step 3 To keep the handrail supported cut out and remove only 4 or 5 balusters at one time then replace them with the adjustable wrought iron. Step 4 Once existing balusters are removed mark the centers on masking tape.