LCD Multi-Media Display LT26HVE / LT26HVX Series
Table of Contents Important Information Important Safety Precautions FCC Statement Accessories Installation And Connection Guide Identifying Front Controls and Rear Inputs -Descriptions of Input Types -Connecting the TV's Power Installation -Connecting to an Antenna or Video Equipment with Antenna outlet -Connecting to a VCR -Connecting to an Audio Receiver/Home Theater System -Connecting to a DVD Player with A/V or S Video Cables -Connecting to a DVD Player with Component Cables -Connecting to a Satellite
Impor tant information Caution Risk of electronic shock Do not open To reduce the risk of electronic shock, do not remove cover (or back). No user-serviceable parts inside. Refer service to qualified Repair Technician or Repair Center. Read the following context indicated by the following symbol to the left. It indicates important literature in operating the product. Read the following context indicated by the following symbol to the left.
Important safety precautions Cleaning Stand Remember to unplug the AC cord from the AC outlet before cleaning the display unit. And do not use liquid cleaners or aerosol cleaners to clean the display. Do not place the display unit on an unstable place. The TV may fall resulting in serious personal injuries to nearby people as well as damage to the display unit. Ventilation Do not cover or block these vents and openings located on the top and back of the display.
Important safety precautions Never insert objects or spill liquid into the display unit Precautions when transporting the display Never insert any object into the display unit through openings or spill liquid on the display unit. High voltage flows in the display unit, and inserting an object can cause electric shock and/or short internal parts. Carrying the display requires two or more people. Attachments Keep away from water and moisture Do not use attachments not recommended by the manufacturer.
Important safety precautions Replacement parts In case the display unit needs replacement parts, make sure that the service technician uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.
FCC Statement FCC notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Accessories Supplied accessories Remote control & batteries (AAA x 2) VGA cable (D-Sub 15 male) x 1 User manual booklet x 1 LCD Multi-Media Display LT26HVE/LT26HVX Series Quick start guide x 1 LCD Multi-Media Display Quick Start Guide LT26HVE /LT26HVX Series Power cord x 1 Warranty card x 1 06
Accessories Optional accessories Audio cable with stereo mini jack AV cable with RCA connector Use the proper cable for the device.
TV Installation and Connection Guide Identifying Front and Rear Panels Front Panel POWER Turns display on / off MENU Displays the On Screen Display(OSD) menu. In OSD menu, press it to return to pre-phase CH / CH IR Sensor Adjusts Channel. In the OSD menu, both keys are used to navigate within menu VOL+/VOL- Adjusts volume SOURCE Press to switch the input sources IR SENSOR Contains Infra-red light for digital data transmission by the remote control.
TV Installation and Connection Guide Identifying Front and Rear Connectors Rear Panel VIDEO Component1 Audio Output VIDEO-1 S-VIDEO L L R Y ANT Pb / Cb VGA R Service Port S-VIDEO AC IN power cord connects here. VIDEO Pr / Cr L R L R Component2 VIDEO-2 DVI / HDCP L R EarPhone L R Y Pb / Cb Pr / Cr (Cont'd) The display will automatically detect the input jack being used.
TV Installation and Connection Guide Descriptions of Connector Types You may find it necessary to use some of the following connector types during setup. 75-ohm coaxial cable Used for TV cable connection . S-Video Cable High quality video cable for enhanced picture quality.
TV Installation and Connection Guide Connecting the Power Cord Complete other connections prior to connecting the power cord: 1.Connect the power cord to the AC IN connector of the TV 2.Connect the other end of the power cord to the wall outlet.
TV Installation and Connection Guide Installation In the following pages, you will find directions on how to install your tv and choice of video equipment.
TV Installation and Connection Guide Connecting to an Antenna or Video Equipment with Antenna outlet Disconnect all power sources before making any connection. 1.Connect a 75ohm coaxial cable onto the ANT input on the back of the TV's right side panel.
TV Installation and Connection Guide Connecting to a VCR Disconnect all power sources before making any connections. Use this hookup if you subscribe to a cable TV system that does not require a cable box. 1.Using A/V cable and S-Video cables, connect the VCR's Audio and S Video OUT jacks to the TV's Audio and S-Video In jacks.
TV Installation and Connection Guide Connecting to an Audio Receiver / Home Theater System Disconnect all power sources before making any connections. 1.Using an audio cable, connect the TV's audio OUT jack to the audio receiver's audio IN or AUX IN jacks.
TV Installation and Connection Guide Connecting to a DVD Player with A/V or S-Video Cables Disconnect all power sources before making any connections. Note: Use this method of connection if your DVD player does not have component (Y, Pb,Pr) jacks. Note: If your DVD player has component video output connectors, for best picture quality, use the connection described for Connecting to a DVD Player With Component Connectors.(See page.17) 1.
TV Installation and Connection Guide Connecting to a DVD Player With Component Cables Disconnect all power sources before making any connections. Note: Use this method of connection if your DVD Player has component (Y, Pb, Pr) jacks. 1.Using a component video cable, connect the DVD Player's Y, Pb and Pr jacks to the Y, Pb and Pr jacks on the TV.
TV Installation and Connection Guide Connecting to a Satellite Receiver or Cable Box with A/V Connectors Disconnect all power sources before making any connections. 1.Using Audio and S Video cables, connect the satellite receiver's Audio and S Video OUT jacks to the TV Audio and S Video IN jacks. 2.Connect a 75-ohm coaxial cable from your cable or antenna to the TV Ant (Antenna) jack.
TV Installation and Connection Guide Connecting to a Satellite Receiver or Cable Box With Component Connectors Disconnect all power sources before making any connections. Use this hookup if your Satellite Receiver or Cable Box has component (Y, Pb, Pr) jacks. 1.Using a component video cable, connect the Satellite Receiver or Cable Boxes' Y, Pb and Pr jacks to the Y, Pb and Pr jacks on the TV.
TV Installation and Connection Guide Connecting to a PC with VGA Connector Rear of TV L DVI / HDCP Disconnect all power sources before making any connections. VGA R 1.Using a D-Sub 15 pin cable, connect the VGA output terminal of the PC to the TV's VGA signal input terminal. 2.You may need to use a Stereo mini jack to RCA L/R connectors to receive audio.
TV Installation and Connection Guide Other Connections Disconnect all power sources before making any connections. See setup instructions for: Connecting to an Audio Receiver on page 15.
Remote Control Guide Remote Function Keys & Description Regular Buttons POWER Press to turn display on/off. CH + / CH- Press to adjust channel up and channel down. NUMBER BUTTONS Press the number buttons to select channels on the display. 1 VOL+/ VOL- Press to adjust the volume. 2 3 RETURN (Channel Return) Press to return the to previous-channel. 4 5 MTS Press to select from SAP, Mono or Stereo mode buttons (Direction Buttons) Press to move highlighted selection through menus or submenus.
Remote Control Guide Hot Keys Tutorial The remote control contains 15 additional "Hotkeys" that represent direct access to a certain function on your TV. Hotkeys enable you to directly change the setting to your preference without having to navigate through the OSD (On Screen Display) Menu. How to use your Hot Keys HOT KEY FUNCTION TV / VIDEO Press to select a video signal from different sources (TV 1 , AV 1, AV 2, SV 1, , SV 2, YPbPr 1, YPbPr 2, DVI and VGA ) .
Remote Control Guide Battery Installation 1.Push the tab and pull it out as illustrated below. 2.Insert two size AAA batteries (supplied) by matching the (+) and (-) on the batteries to the diagram inside the remote control's battery department. 3.Replace the cover back and make sure the cover "snaps" into the remote control. Note: 1.The display unit comes with two new AAA batteries as accessories.
Adjusting On Screen Displays (OSD) Introduction After you have finished connecting your TV, you are now ready to choose and personalize your TV settings in the OSD (On Screen Display) menu. There are four main sections in the OSD Menu: Video Audio Miscellaneous Screen To Operate in the OSD 1. Press "Menu" button to enter OSD menu mode. 2. In Main OSD Menu, use the and keys to select and enter each main OSD Section: Video; Audio; Miscellaneous; Screen.
OSD-Video Adjusting On Screen Displays (OSD) VIDEO Adjusting TV Picture Settings Advance Video Quality In this Setup Index, you can adjust the video and picture settings to suit your personal preferences.
OSD-Video Adjusting On Screen Displays (OSD) Advance Video Adjust To further adjust specific picture settings, enter this function by pressing the button. Advance picture setting Definition of Terms Item DNR Status Off/Low/Middle/Strong Black Level Extender On/Off White Peak Limitator On/Off Flesh Tone On/Off Adaptive Luma Control On/Off Description and Function DNR-Dynamic Noise Reduction. Reduces high frequency noise dynamically. Off- Dynamic Noise Reduction is disabled.
OSD-Vidio Adjusting On Screen Displays (OSD) To Adjust S ettings: Use the and as seen below: remote buttons to adjust each Video picture setting, Brightness Saturation Hue To exit, press the Button To Reset Factory Settings If, at any time, you wish to go back to original factory setting, you may do so by choosing the Default setting in the OSD Picture and Audio Sections. Selecting "Default," will reset all OSD settings to the original manufacture settings.
OSD-Audio Adjusting On Screen Displays (OSD) Audio Adjusting Sound Quality Audio setting Definition of Terms Item Treble Bass Balance Surround Adjustment -50~50 -50~50 -20~20 On / Off Equalizer 1 MTS Off, Concert, Living Room, Hall, Arena, Church Off, Rock, Pop, Live, Classic, Soft Mono, Stereo, SAP Speakers On / Off Equalizer 2 Function Adjusts higher pitched sounds Adjusts lower pitched sounds Adjusts volume balance in Left and Right Creates a panoramic stereo audio image by producing deep and
OSD-Audio Adjusting On Screen Displays (OSD) To Adjust Settings: Use the and seen below: remote buttons to adjust each Audio sound quality, as Treble Bass Balance Surround Sound is an available option for creating a panoramic stereo audio image by producing deep and rich bass tones and clear treble tones. This enables you to enjoy powerful sound effects like those in a movie theater. Speakers Must turn off speakers of the TV when using a Receiver or Home Theater System.
OSD-Audio Adjusting On Screen Displays (OSD) OSD Audio Settings: Equalizer 1 OSD Audio Settings: Equalizer 2 31
OSD-Audio Adjusting On Screen Displays (OSD) MTS System for Stereo TV You can enjoy stereo, bilingual and mono programs. Additionally, you can press the hotkey "MTS" until the desired sound in dication appears.
OSD-Miscellaneous Adjusting On Screen Displays (OSD) MISCELLANEOUS Adjusting Personal TV Settings In this Section, you can adjust additional TV settings to your personal preference, including channel setup, choosing tuner modes, setting up timer, closed caption services, parental controls, and viewing the OSD in your preferred language.
OSD-Miscellaneous Adjusting On Screen Displays (OSD) Setting the Channels After you finish connecting your TV, you can run Auto Scan program to setup your channels. The program will scan and preset all receivable channels automatically. To Cancel Auto Program Exit auto scan program by pressing "menu" Key. Note: The Auto Scan is set to scan cable TV channels by default. You cannot receive and set the cable TV channels VHF/ UHF channels at the same time.
OSD-Miscellaneous Adjusting On Screen Displays (OSD) Watching favorite channels To watch you favorite channels after specifying your preferences, just press the Hotkey "FAVORITE" to browse through each favorite channel. Editing Channels You can also edit channels to your personal preference. Once you edit a channel, it will be skipped when surfing through TV channels. To Skip or Lock a Channel 1.Make sure Channel Skip or Channel Lock is highlighted. 2.
OSD-Miscellaneous Adjusting On Screen Displays (OSD) Personal Channel Preferences: Channel Naming You can also create personal names for each channel, which will show up in the upper Right hand corner of the TV screen. To Name a Channel: 1. Enter Channel Name sub-page 2. Enter Channel name using alphabet-numerical keypad as seen below: 3. Press "Okay" to exit keypad when naming is complete.
OSD-Miscellaneous Adjusting On Screen Displays (OSD) Setting up the TV Timer To setup the time on the TV: 1.Using and keys, enter in HH: MM: SS Enter the time using the number keys found on the remote. 2.press "Enter" when complete. NOTE: Clock will NOT BE affected when Factory Default settings are reset.Under Activate, "ON" allows the start/stop time to be ongoing whereas, "ONCE" allows it to only function once.
OSD-Miscellaneous Adjusting On Screen Displays (OSD) Timer: Start Time / Stop Time You can set the TV to turn On and/or Off automatically at a predetermined time through the timer function. Use the Start Time to setup the hour and minute preferences. Your TV will automatically turn on at the set time. Use the Stop Time to setup the hour and minute preferences. Your TV will automatically turn off at the set time. Note: Alarm WILL BE affected when Factory Default settings are reset.
OSD-Miscellaneous Adjusting On Screen Displays (OSD) TV OSD Languages There are nine language formats available for the OSD Menu. You may choose from the following: English, Chinese Traditional, Chinese Simplified, Spanish, French, German, Portugese, Italian and Russian. Using the Parental Control Feature To block programs you feel unsuitable for your children, you need to Set the TV for desired rating systems.
OSD-Miscellaneous Adjusting On Screen Displays (OSD) Parental Control 1. This function allows programs to be restricted and controlled by parents based on FCC regulation. It prevents children from watching program contents that may be prohibited by parents. 2. Restriction of programs is based on three Rating Systems: MPAA Rating, TV (Child) Rating and TV (Entire Audience) Rating. The MPAA Rating restricts based on age. TV (Child) rating and TV (Entire Audience) Rating restrict based on age and contents.
OSD-Miscellaneous Adjusting On Screen Displays (OSD) Activating the Parental Control Feature Once you enter the highlighted section of Parental Control, you will have to enter your password. The Factory Default password is"9999". Once you enter the Parental Control Menu, you may change the password to your personal preference. To setup, enter each sub-menu to setup your parental controlled TV channels.
OSD-Miscellaneous Adjusting On Screen Displays (OSD) MPAA Rating controls channels and movies that are rated from G, PG-13, R, NC-17, and X. TV Rating controls channels and movies that have been rated from TV-Y, TV Y-7, TV-G, TV-PG, TV-14, and TV-MA. To Block Unrated Channels You may choose "YES" for Block MPAA Unrated and Block TV None Rating. This will lock you from accessing any channels that do not contain MPAA or TV Ratings.
OSD-Miscellaneous Adjusting On Screen Displays (OSD) Setting up Parental Control Password Enter the password sub-page. Enter the current password. If this is the first time, you do not have to enter a password. You will have to enter and confirm your password before changing to a new password. Please keep password within 4 numbers. If you enter the incorrect password, you will see an error page. Please re-enter the new password and confirmation password again.
OSD-Miscellaneous Adjusting On Screen Displays (OSD) Factory Default Option Reset Factory Settings: Initiating Factory Default will reset all OSD settings to original manufacture settings.
Adjusting On Screen Displays (OSD) Adjusting Screen Modes There are two option in the Screen Modes, "aspect & "View." Apect will allow user to select different aspect ratios, whereas, View will all different modes of viewing 1 or 2 sources. Changing the Screen Mode You can alter the aspect ratio of a picture by choosing between these four options: Input 4:3 Input 16:9 Full Screen 4:3 16:9 Panoramic Full Screen Enlarges the picture to 16:9 wide mode, by stretching the picture horizontally only.
OSD-Screen Adjusting On Screen Displays (OSD) Changing the View Modes You can select four view types of picture modes that best suits the program you are watching. You can set a different view mode for each video mode for each input and store it manually. View Modes Function PIP Picture-in-Picture has a Main screen and small screen view Split Screen Full Screen split in two Views Picture in Picture (PIP) Allows you to view a main screen (Picture 1)and a secondary small screen (Picture 2).
OSD-Screen Adjusting On Screen Displays (OSD) OSD View TV View 47 Pic1 Pic2 Pic1 Pic2
OSD-Screen Adjusting On Screen Displays (OSD) PIP mode You may adjust setting for each Picture source. Pic 1 allows for a TV, AV1, AV2 and DVI sources while Pic 2 supports all other input sources.
OSD-Screen Adjusting On Screen Displays (OSD) Split Screen Allows you to view two separate screens simultaneously (Picture 1 and Picture 2). Press 'source' button to switch from P1 to P2 and vice versa.
Adjusting On Screen Displays (OSD) Split Screen mode You may adjust setting for each Picture source. Only Pic1 supports a TV input source, while Pic2 supports all other TV input sources. Item Pic1 Pic2 Adjustment TV1, AV1, AV2, DVI AV1, AV2, S-Video1, S-Video2, YpbPr1, YpbPr2, DVI, VGA Function Switches the source of Picture 1 Switches the source of Picture 2 Note: Pic 1 allows for a TV, AV1, AV2 and DVI.
Specifications TFT LCD Panel Specificatinos LT26HVE LT26HVX Panel size 26in 26in Aspect Ratio 15:9 16:9 Pixels 1280 X 768 1366 X 768 Brightness 7 00 cd/ m 2 80 0 cd / m 2 Contrast 750:1 1200:1 H/V(View Angle) 170 (H) / 170 (V) 178 (H) / 178 (V) Gray to Gray Response Time 12 ms 8 ms PC compatible frequency 30~85 KHz(H) / 50~80Hz(V) Max. 1280x1024 @60Hz 30~85 KHz(H) / 50~80Hz(V) Max.
Specifications TFT LCD Panel Output Terminals LT26HVE LT26HVX Audio Output(Rear) Output 1:Earphone X 1 Output 1:Earphone X 1 Output 2:RCA, R/L X 1 Output 2:RCA, R/L X 1 Others Power (Voltage) 100~240 VAC / 50-60 Hz 100~240 VAC / 50-60 Hz (Power Consumption) 130W 130W Stand-by < 3W < 3W Dimensions (W x D x H) 33.46 in x 19.6 in x 8.93 in 33.46 in x 19.6 in x 8.93 in Weight w/ stand 30.86 lbs 34.82 lbs Dimensional drawing 4.41in 18in 19.6in 8.93in 13.5in 33.
Timing Mode for VGA and DVI Source Resolution YPbPr 480p 59.94 31.469 27 720p 60 45 74.25 1080i 60 33.75 74.25 512 x 384 60.147 24.48 15.667 640 x 350 85 37.861 31.5 640 x 400 85 37.861 31.5 56 24.823 21.05 59 30.296 24.964 59 30.295 25.024 66 35 30.24 66 34.975 31.34 66 35 30.24 72 37.861 31.5 75 37.5 31.5 75 39.375 31.5 85 43.269 36 720 x 350 70 31.469 28.32 720 x 400 70 31.469 28.32 85 37.927 35.5 87 39.444 35.5 56 35.
Timing Mode for VGA and DVI Source Resolution VGA 1024 x 768 Horizontal frequency (Khz) Pixel rate (MHZ) 75 60.241 80 75 62.937 84.6 75 61.08 86 75 60.023 78.75 77 62.04 84.4 85 68.677 94.5 70.012 63.851 94.5 75 67.5 108 1152 x 870 75.062 68.681 100 1152 x 900 65.95 61.795 92.9 66.004 61.846 94.5 76.047 71.713 105.6 76.149 71.809 108 60 63.36 89.2 61.399 65.286 92.9 1280x 960 60 60 108 1280 x 720 60 45 74.25 1280 x 768 60 48.36 81.
Pixels Policy Syntax's D.O.A. Policy for LCD TVs for Defective Pixels on LCD Panels (Applicable to the LCD TV sold within USA & Canada only) Syntax TM LCD TVs are evaluated at a distance of approximately 50 centimeters (approximately 20 inches) between the LCD panel and the eyes of the user at a 90 degrees viewing angle. All LCD panels have been tested to ensure they comply with our factory standards.
Glossary 3:2 pull down - Process of converting 24 frames per second film to video by repeating one film frame as three fields, then the next film frame as two fields. 1 1 1 2 2 1 1 1 2 2 480I - 480 lines of display every 1/60 of a second; image is displayed by interlace scanning. See also Interlaced 480P - 480 lines of display every 1/60 of a second; image is displayed by progressive scanning. See also Progressive.
Glossary Color - The term refers to the amount of color present. This varies between each user, as each person perceives colors differently. Color Temperature - Feature on the OSD for the Syntax Olevia models that enables warm, normal or cool color settings. Warm emphasizes red, cool emphasizes blue, and normal doesn't emphasize any of the primary colors. This setting may affect each person individually depending on how color is perceived.
Glossary Interlaced - Images are the result of lines of data reassembled. Interlaced refers to the process of an image's odd lines reassembled from top to bottom taking about 1/60 of a second, before reassembling the even lines which results in a full picture. Antonym: Progressive Language - Feature on the OSD for the Syntax Olevia models that enables the OSD to be read in different languages.
Glossary Swap - Button featured on the Olevia remote. Used in the POP3 or PIP12 views to swap the sub viewable boxes with the main viewable box. Tint - Adjusts the whiteness level within the color. Similar to Hue. Under- scanning Term used where the image displayed is smaller than the display area. Up convert - Process of converting a 480P/I signals to 720P or 1080I. V-Chip - Chip that controls access to forbidden content specified by an adult. VGA - 1. Video Graphics Array (DB15) 2.
