Axis Bar Leaner Installation Guide TOOLS REQUIRED: Powered screwdriver myolgoffice.
AXIS BAR LEANER Installation Guide * To prevent possible scratches or damage, assemble the desk/table on a soft surface such as a blanket, carpet or packaging.
AXIS BAR LEANER Installation Guide STEP 1: Assemble corner legs and short rails together and fully tighten with provided screws. STEP 2: Assembly end leg frames and long rails together and fully tighten with provided screws. Desk Top Desk Back Rail Screw 5mm STEP 3: Pre-drill holes into the worktop, place worktop on a clean, flat surface and fully tighten the worktop to each rail using the provided screws. COMPLETE: Using 2 people rotate table into upright position.
