Typical Assembly Details Components Qty Part No. 1. Steel Plate x1 MODZAPLATE 2. Feet tube Ø 51 x1 MODZA22G95P 3. Large foot x4 MODZA12 4. Cross Collar x1 MODZA01 5. Foot Glide x4 MODZA25 6. Cross Gasket x1 MODZA26 7. Table Top x1 Screws 8. M5*20 Self tapping x8 9. M8*16 x4 10. M10*110 x1 11. M8*30 x30 12. M6 Allen Key x1 13.
Typical Assembly Details Components Qty 1. Die Cast Upper Wrist x6 Part No. MODZA06 2. Top Rail FWTOPRAIL 3. Bottom Rail fwbotrail 4. Feet Tube Ø51 x6 MODZA22-695 5. Large Foot x6 MODZA12 6. 150° Collar x4 MODZA02 7. Cross Collar x2 MODZA01 8. Bottom Tee Connector x2 MODZA07 9. Cross Connector x4 MODZA08 10. Collar Plug x4 MODZA15 11. Tee Connector x6 MODZA09 12. Minus Gasket x2 MODZA27 13. 150° Gasket x4 MODZA28 14. Foot Glide x6 MODZA25 15.
Modulus Multi Post Pedestal Base Typical Assembly Details Components Qty Part No. 1. Die Cast Upper Wrist x6 MODZA06 MODZAst11.2 2. Steel Strap x2 3. T - Tube x4 MODZAset11.2 4. Feet Tube Ø51 x4 MODZA22-695 5. Large Foot x4 MODZA12 6. Cross Collar x4 MODZA01 7. Cross Connector x1 MODZA08 8. T-Tube + Collar Connector x4 MODZA09 9. Cross Collar Plug x8 MODZA15 10. Minus Gasket x4 MODZA27 11. Foot Glide x4 MODZA25 12 Table Top x1 Screws 13. M8*16 x16 14. M10*110 x4 15.
Modulus Fixed Leg Base Typical Assembly Details Components Qty 1. Die Cast Upper Wrist x2 Part No. MODZA06 2. Top Rail x1 x1 FWTOPRAIL 3. Leg - Tube Ø51 x2 MODZA22-695 4. Fixed Foot x2 MODZA 5. Foot Glide x4 MODZA25 6. Top Rail Plastic Plug x2 MODZA18 7. Plastic Support x1 MODZA16 8. Table Top x1 Screws 9. M10*30 x2 10. M10*65 x2 11. M4*20 Self tapping x2 12. M5*25 Self tapping x8 13. M8*16 x4 14. 4mm Allen Key x1 15. 5mm Machine Drill x1 16. 8mm Machine Drill x1 17.
Modulus Collar Leg Table with Power Pole Upgrade Installation Guide TOOLS REQUIRED: Powered screwdriver. myolgoffice.
Modulus Single Post Pedestal Table INSTALLATION GUIDE 11 1 8 14 6 15 COMPONENTS 1 2 3 4 5 6 7 8 9 10 Upper Wrist x2 Top Rail x1 Leg Tube x2 Large Foot x4 Foot Glide x4 Top Rail Cap x2 150° Collar x2 Table Top x1 150° Gasket x2 Power Pole Bracket x2 SCREWS 11 12 13 14 15 M10x30mm x2 M10x110mm x2 M8x16mm x4 M5x25mm Self Tapping x8 M8x80mm x2 2 10 7 3 13 9 4 12 5 myolgoffice.
Modulus Single Post Pedestal Table INSTALLATION GUIDE 01 Slide 2 large feet into the collar, place the 150° gasket on top and fully tighten the 2 M8x16mm bolts into the collar. (Repeat with all collars). 03 Place the feet tube on top of each collar, and the upper wrist on top of the feet tubes. Fully tighten the M10x30mm bolts through the upper wrists, and M10x110 bolt, spring washer and flat washer through the collars.
Modulus Single Post Pedestal Table INSTALLATION GUIDE 05 Place the top rail cap into the exposed side of the upper wrist. 06 With the frame assembly complete, locate it in the centre of the work surface and screw the remaining self tapping screws into each upper wrist. Leftover components: Pullbar 20mmØ x1 Leg Tube 45mmØ x2 myolgoffice.
Modulus Flip with Modesty Panel Installation Guide TOOLS REQUIRED: Powered screwdriver myolgoffice.
MODULUS FLIP TABLE WITH MODESTY PANEL Installation Guide * To prevent possible scratches or damage, assemble the Desk upside down on a soft surface such as a blanket, carpet or packaging. * Attach modesty panel to the frame and worksurface using bolts, screws and brackets provided. Tighten using Allen Key (or battery drill). STEP 1: Lay modesty panel on flat surface, fasten brackets to modesty with threaded bolts provided. STEP 2: Fasten lever arms onto modesty with threaded bolts.
MODULUS FLIP TABLE WITH MODESTY PANEL Installation Guide STEP 3: Complete Position modesty on worktop (table upsidedown), attach lever arms onto frame, fully tighten bolts. STEP 4: Hold the panel perpendicular to the worksurface and drill the self tapping screws into the worktop.
Modulus Fixed Leg Table Installation Guide TOOLS REQUIRED: Powered screwdriver. myolgoffice.
Modulus Single Post Pedestal Table INSTALLATION GUIDE 7 8 11 9 12 6 1 2 3 13 COMPONENTS 1 2 3 4 5 6 7 8 Upper Wrist x2 Top Rail x1 Leg Tube x2 Fixed Foot x2 Foot Glide x4 Top Rail Cap x2 Plastic Support x1 Table Top x1 10 4 SCREWS 9 10 11 12 13 M10x30mm x2 M10x65mm x2 M4x20mm Self Tapping x2 M5x25mm Self Tapping x8 M8x16mm x4 5 myolgoffice.
Modulus Single Post Pedestal Table INSTALLATION GUIDE 01 Screw the glides into the base of the fixed feet, leaving the glides one turn from tight (then they can be adjusted easily if the floor is uneven). 03 Place the upper wrist on top of the leg tube, making sure each small notch in the top of the leg tube is in-line with the bumps on the bottom of the upper wrist. Fully tighten to maximum tension the M10x30mm bolts.
Modulus Single Post Pedestal Table INSTALLATION GUIDE 05 Fully tighten the small screws located at the bottom of each upper wrist to firmly hold the top rail in place. 07 Locate the plastic support bracket over the centre of the top rail, and click into place. 06 Place the top rail cap into the exposed side of the upper wrist. 08 With the frame assembly complete, locate it in the centre of the work surface and screw the remaining self tapping screws into each upper wrist and plastic support.
Modulus Single Post Pedestal Table INSTALLATION GUIDE myolgoffice.
Modulus Flip Table Installation Guide TOOLS REQUIRED: Powered screwdriver myolgoffice.
MODULUS FILP TABLE Installation Guide * To prevent possible scratches or damage, assemble the table upside down on a soft surface such as a blanket, carpet or packaging. Recommended 2-person Step * Attach Leg to the Top assembly by using Bolts, spring washer, flat washer. Tighten using the Allen Wrench provided. STEP 1: Place the pull bar (a) and cross tube (b) in the correct location pictured above, slide the 2 end legs in place STEP 2: Fully tighten 2 small screws into the cross tube.
MODULUS FILP TABLE Installation Guide STEP 3: Ensure the frame is located in the centre of the worksurface. STEP 4: Fully tighten all 6 screws on each mechanism. Recommended 2-person Step STEP 5: On all tables with width larger than 700mm, secure the pull bar with the supplied washer and screw in the location pictured above (slot end closest to the pull-bar). Leave screw 1 turn from tight so the pull-bar can be operated smoothly. COMPLETE: Using 2 people rotate table into upright position.
MODULUS FILP TABLE - CONNECTORS/LINKS Installation Guide Drilling Patterns for Optional Connectors/Links Locked Unlocked 73 73 200 36.5 36.5 17 200 CL 17 1.
MODULUS FLIP TABLE Installation Guide Drilling Patterns for Modulus/Uni Flip Tables Mechanism & Pull Bar 170mm B 2x 2mmØx12mm h 114mm Table Width 294mm C A B C 796 96 NA 1500mm 1096 96 NA 1800mm 1396 96 NA Width-750mm A B C 1200mm 796 171 100 1500mm 1096 171 100 1800mm 1396 171 100 Width-900mm A B C B 12x 2.
Modulus 4 Post Pedestal Table Installation Guide TOOLS REQUIRED: Powered screwdriver. myolgoffice.
Modulus 4 Post Pedestal Table INSTALLATION GUIDE 13 16 2 1 12 17 18 18 4 COMPONENTS 1 2 3 4 5 6 7 8 9 10 11 12 13 Die Cast Upper Wrist x4 Steel Strap x2 T Tube x4 Feet Tube x4 Large Foot x4 Cross Collar x4 Cross Connector x1 T Tube & Collar Connector x4 Cross Collar Plug x8 Minus Gasket x4 Foot Glide x4 Top Rail Cap x8 Table Top x1 6 3 8 M8x16mm x16 M10x110mm x4 M10x30mm x4 M6x25mm x4 M5x20mm Self Tapping x12 14 10 SCREWS 14 15 16 17 18 9 7 5 15 11 myolgoffice.
Modulus 4 Post Pedestal Table INSTALLATION GUIDE 01 Slide the large foot, T connector and 2 cross collar plugs into the cross collar, place the minus gasket on top, and fully tighten the 2 bolts into the collar. (Repeat with all 4 legs) 03 With all 4 feet assembled, connect them to the T tube and cross connector using M8x16mm bolts. 02 Screw the 4 glides into the base of the large feet, leaving the glides one turn from tight (then they can be adjusted easily if the floor is uneven).
Modulus 4 Post Pedestal Table INSTALLATION GUIDE 05 06 Fig D Place each upper wrist on top of the feet tubes. Place the top rail caps into the large holes. Fully tighten to maximum tension M10x30mm bolts to hold the upper wrist in place. 07 Carefully place the assembled frame upside down on top of the work surface. Measure the distance from the upper wrist to the edge of the work surface, and make sure the frame is centered over the work surface.
Modulus 4 Post Pedestal Table INSTALLATION GUIDE myolgoffice.
Modulus Single Post Pedestal Table Installation Guide TOOLS REQUIRED: Powered screwdriver. myolgoffice.
Modulus Single Post Pedestal Table INSTALLATION GUIDE 11 7 1 8 2 4 COMPONENTS 1 2 3 4 5 6 7 Steel Plate x1 Feet Tube x1 Large Foot x4 Cross Collar x1 Foot Glides x4 Cross Gasket x1 Table Top x1 6 9 10 3 SCREWS 8 9 10 11 M5x20mm Self Tapping x4 M8x16mm x4 M10x110mm x1 M8x30mm x3 5 myolgoffice.
Modulus Single Post Pedestal Table INSTALLATION GUIDE 01 Slide the 4 large feet into the cross collar. Place the cross gasket on top of the feet and collar, and tighten 4xM5 screws into the cross collar. 03 02 Screw the 4 glides into the base of the large feet, leaving the glides one turn from tight (then they can be adjusted easily if the floor is uneven).
Modulus Single Post Pedestal Table INSTALLATION GUIDE 05 With the frame assembled, place it upside down onto the work surface, and measure the top from all sides to make sure it’s centered. 06 Fully tighten the last 4 self tapping screws into the work surface. myolgoffice.
Modulus Single Post Collar Leg Table - Single Span Installation Guide - Version 2 TOOLS REQUIRED: Powered screwdriver. myolgoffice.
Modulus Single Post Collar Leg Table - Single Span INSTALLATION GUIDE 1 8 10 11 14 2 6 COMPONENTS 1 2 3 4 5 6 7 8 9 10 Upper Wrist x2 Top Rail Ø45 x1 Leg-pole Tube Ø51 x2 Large Foot x4 Foot Glide x4 Top Rail Cap x2 150° Collar x2 Table Top x1 150° Gasket x2 Plastic Support x1 SCREWS 11 12 13 14 M10x30mm x2 M10x110mm x2 M8x16mm x4 M5x25mm Self Tapping 3 7 12 4 9 13 5 myolgoffice.
Modulus Single Post Collar Leg Table - Single Span INSTALLATION GUIDE 01 13 02 9 5 4 7 Slide 2 large feet4 into the collar, place the 150° gasket9 on top and fully tighten the 2 M8x16mm bolts13 into the collar7. (Repeat with all collars). 03 Screw all glides5 into the base of the large feet, leaving the glides one turn from tight (then they can be adjusted easily if the floor is uneven). 04 12 11 1 3 * The top of the leg tube has more rim notches than the bottom of the leg tube.
Modulus Single Post Collar Leg Table - Single Span INSTALLATION GUIDE 05 06 2 With the legs assembled, place each end of the top rail2 into the holes on the side of the upper wrist, making sure they stop before going all the way through. (It is permissible in some applications for top rail to protrude out further past the wrists.) Fully tighten the small screws located at the bottom of each upper wrist to firmly hold the top rail in place.
Modulus Single Post Collar Leg Table - Single Span INSTALLATION GUIDE 08 09 10 14 Optional: For extra strength, the plastic support bracket can be screwed onto the top rails. With the frame assembly complete, locate it in the centre of the work surface and screw the remaining self tapping screws14 into each upper wrist and plastic support. myolgoffice.
