Uni Flip Table Technical Assembly Installation myolgoffice.
Uni Flip Table TECHNICAL INSTALLATION * To prevent possible scratches or damage, assemble the table upside down on a soft surface such as a blanket, carpet or packaging. Recommended 2-person Step * Attach Leg to the Top assembly by using Bolts, spring washer, flat washer. Tighten using the Allen Wrench provided. 7 3 4 5 6 2 1 COMPONENTS Uni Flip Table Frame Leg x 2 Drop-rail Cross Tube x 1 Pullbar x 1 Side-handle x 2 M8 x 80 Bolt x 2 M5 x 30 Wood Screw x 20 Table Top x 1 myolgoffice.
Uni Flip Table TECHNICAL INSTALLATION 01 01 Place the drop-rail cross tube (45mm diameter) between the legs and fully tighten the M8x80 bolts through the plugs into the drop-rail. Making sure the notch in the end of the drop-rail cross tube is in-line with the bumps on the frames. 03 Fit the pullbar into the side-handles. 02 Pencil mark the centre-line of table top underside. Locate frame in the centre of worksurface and fully tighten using the M5x30 screws.
Uni Flip Table TECHNICAL INSTALLATION 01 05 Screw fix the side-handles using M5x30 wood screws. myolgoffice.
Uni Flip Table TECHNICAL INSTALLATION Modulus Flip Table C L Back Edge Flips Down Back Edge Flips Down 58 58 6x3.5mm Table Top Depth C L 272 CENTERED Space 54mm According 100mm To Top 148mm Size 500 Rail = 560mm 800 Rail = 860mm 1100 Rail = 1160mm 1400 Rail = 1460mm 16.5 50 4x3mm 49 Front Edge Flips Up Front Edge Flips Up Table Top Width * Holes position fo mechanism and side-handles x1 x2 x4 myolgoffice.
Uni Flip Table TECHNICAL INSTALLATION Hole Position Connector Hole Positionfor forOptional Optional Connector Links 73 73 200 36.5 36.5 17 200 CL 17 1.2mm pilot hole Care Instructions: Information for use shall be available in the language of the country in which it will be delivered to the end user.
