User manual

AGND Analog GND row of pads

GND GND row of pads

6.5 USB mini connector

Pin # Signal name

1 +5V

2 D-

3 D+

4 Not connected

5 GND

6.6 SD/MMC slot

Pin # Signal name

1 DAT2

2 DAT3/CS

3 CMD/DI

4 VDD

5 CLK/SCLK

6 VSS

7 DAT0/DO

8 DAT1

6.7 Jumper description

P_OUT/P_IN

This jumper controls power on pins 2 and 4 of the JTAG connector. When in P_OUT is closed 3.3V

can be measured at pin 4.

Check the schematic for more info.

Default position is P_OUT – closed, P_IN - open.

Page 15 of 24