User manual

7.3 Useful web links and purchase codes

The web page you can visit for more info on your device is

https://www.olimex.com/Products/Duino/AVR/OLIMEXINO-328/.

For more info on the original Arduino design please visit:

http://arduino.cc/en/Main/arduinoBoardDuemilanove.

ORDER CODES:

OLIMEXINO-328 - assembled and tested Arduino-like board

AVR-ISP500 – assembled and tested AVR-ISP compatible programmer

AVR-ISP-MK2 – assembled and tested AVR-ISP compatible programmer

How to purchase Olimex products?

You can order from our web-shop or from any of our distributors. The list of official Olimex

distributors might be found at: https://www.olimex.com/Distributors/.

Please check https://www.olimex.com/ for more info.

7.4 FAQ

Q1: I installed the OLIMEXINO-328 drivers. The board shows in “Windows Device

Manager” correctly. Yet, the board cannot be programmed in Arduino IDE?

A1. Try installing older FTDI drivers. FTDI drivers 2.08.14 or earlier should fix the issue. The

problem with the FTDI drivers is described in this forum post:

https://www.olimex.com/forum/index.php?topic=2031.0.

Q2: I have OLIMEXINO-328 and Olimex AVR-ISP-MK2. The drivers seem correct, yet I'm

unable to program the board. What might be causing the problem?

A2: Very often people try to use the PDI or TPI interface of AVR-ISP-MK2 for the ICSP slot of

OLIMEXINO-328. Please, use jumper wires to transform the 10-pin ICSP of the AVR-ISP-MK2 to

6-pin ICSP connector of the OLIMEXINO-328.

Page 22 of 23