User manual
Manuals
Brands
OLIMEX Manuals
Dev Kits
PCB design board INO-85-ASM
11
12
13
14
15
16
17
18
19
20
Table Of Contents
DISCLAIMER
CHAPTER 1: OVERVIEW
1. Introduction to the chapter
1.1 Features
1.2 Target market and purpose of the board
1.3 Board variants
1.4 Board version used in the manual
1.5 Organization
CHAPTER 2: SETTING UP THE OLIMEXINO-85 BOARD
2. Introduction to the chapter
2.1 Electrostatic warning
2.2 Requirements
2.3 Powering the board
2.4 Connecting to the Digispark IDE
2.5 Examples and libraries tested by OLIMEX
2.6 Reprogramming the ATtiny85
CHAPTER 3: OLIMEXINO-85 BOARD DESCRIPTION
3. Introduction to the chapter
3.1 Layout (top view)
3.2 Layout (bottom view)
CHAPTER 4: ATMEL AVR ATTINY85
4. Introduction to the chapter
4.1 The microcontroller
4.2 Serial programming of the microcontroller
CHAPTER 5: CONNECTORS AND PINOUT
5. Introduction to the chapter
5.1 USB connector
5.2 GPIO connector
5.3 Jumper description
5.4 Additional hardware components
CHAPTER 6: SCHEMATICS
6. Introduction to the chapter
6.1 Eagle schematic
6.2 Physical dimensions
CHAPTER 7: REVISION HISTORY AND SUPPORT
7. Introduction to the chapter
7.1 Document revision
7.2 Board revision
7.3 Useful web links and purchase codes
7.4 Product support
OLIMEX© 2013
OLIMEXINO-85 user's manual
6.2 Physical dimensions
Note that all dimensions are in inches.
The highest element on the board is capacitor C1
with 0.5 inches of height (includes the PCB
height).
Page 19 of 22
1
...
...
17
18
19
20
21
...
22
