User manual

5.3.5 ETHERNET
Pin # Signal name(chip side) Pin # Signal name(chip side)
1 TX+ 5 Not Connected (NC)
2 TX- 6 Not Connected (NC)
3 VCC/2 (2.5V) 7 RX+
4 Not Connected (NC) 8 RX-
LED Color Usage
Left Yellow 100MBits/s (Half/Full duplex)
Right Green Activity
5.3.6 CAN1 AND CAN2
Controller Area Network(CAN) is a standard designed to allow microcontrollers and devices to
communicate with each other within a vehicle without a host computer. Both CAN1 and CAN2
connectors follow the same layout.
Pin # Signal
1 GND
2 CANL
3 CANH
5.3.7 JTAG
The microcontroller has EJTAG support. The EJTAG signals are provided on the 14-pin JTAG
connector.
Pin # Signal name Pin # Signal name
1 NC 8 GND
2 GND 9 TCK
3 TDI 10 GND
4 GND 11 RSTN
5 TDO 12 CUT
6 GND 13 NC
7 TMS 14 3.3v
Page 17 of 22