User manual

ORDER CODE:
PIC32-PINGUINO – fully assembled and tested board
PIC32-PINGUINO-OTG – fully assembled and tested board
How to order?
You can order to us directly or by any of our distributors.
Check our web https://www.olimex.com/ for more info.
Revision history:
Board's revision
Rev. C, March 2011
Rev. D, March 2012
– Changed various names on the top and the bottom of the board
– Removed C14 - 2.2uF, C15 - 2.2uF, VR2-MCP1700T-3302E/MB; Added L2-
FB1206 – because of random hangs of the PIC32 in specific cases
– Removed C20 – was filtering not only the button bounce but some of the higher
frequencies which we decided to change
Manual's revision
Rev. A, August 2011
– At first page “Copyright(c) 2011, OLIMEX Ltd, All rights reserved” is replaces with
“Designed by OLIMEX Ltd., 2011”
– In schematic “COPYRIGHT(C) 2011, OLIMEX Ltd.” replaced with “DESIGNED BY
OLIMEX LTD, 2011”
Rev. B, October 2011
– In “BOARD USE REQUIREMENTS” added more information about cables;
“Hardware” and “Warning”
– The picture for USB on-the-go connector is changed
Rev. C, March 2012
– Removed “10 .We use separate voltage regulator for the Analog part, which allow the ADC
to be read correctly without the digital noise pickup.”
– Updated schematic with board version D
– Various spelling changes and page formatting
Rev. D, October 2012
– Adjusted the manual for both PIC32-PINGUINO and PIC32-PINGUINO-OTG
– Updated disclaimer
– Updated schematic with board version D
Page 17