User manual

15. All signals on the connectors are printed on the top and on the bottom of
the board, so when you check with probe you know exactly which port you are
measuring.
16. 4 mount holes to make board attachment easier.
ELECTROSTATIC WARNING:
The PIC32-PINGUINO and PIC32-PINGUINO-OTG boards are shipped in
protective anti-static packaging. The boards must not be subject to high
electrostatic potentials. General practice for working with static sensitive devices
should be applied when working with these boards.
BOARD USE REQUIREMENTS:
Cables: Mini USB cable
For programming via ICSP connector you will need PIC-ICSP
connector and USB A-B cable for, PIC-KIT3.
Hardware: Programmer/Debugger – PIC-KIT3, or other compatible
programming/debugging tool.
!!!Warning!!! PIC-ICD2, PIC-ICD2-POCKET and PIC-ICD2-TINY are not
supported nor recommended. They lack software support in
newer MPLABs
MAIN DIFFERENCES BETWEEN THE TWO BOARDS:
The main difference between PIC32-PINGUINO and PIC32-PINGUINO-OTG is the
USB connector. The first board has a standard USB connector that is configured as
a device which allows the board to communicate only with hosts. The PIC32-
PINGUINO-OTG can be configured either as a device or a host – which allows the
board to communicate with devices also – e.g. USB smartphones, keyboards, mice
etc.
Page 4