PROTO-SHIELD development board Users Manual All boards produced by Olimex are ROHS compliant Revision Initial, June 2011 Copyright(c) 2011, OLIMEX Ltd, All rights reserved Page 1
INTRODUCTION: PROTO-SHIELD is prototype board compatible with all of Olimex's ARDUINO compatible boards – like OLIMEXINO-328, OLIMEXINO-STM32 and PIC32-PINGUINO. The board comes without mounted connectors on it, but it is shipped with one 6x1 connector and three 8x1 connectors, which can be mounted by the customer. The prototype area gives user the opportunity to solder different extensions for ARDUINO compatible boards. All this allows you to build a diversity of applications.
2 1 L1_E 1 L2_E C301 C302 C303 C304 C305 C306 C307 C308 C309 C310 C311 C312 C313 C314 C315 C201 C202 C203 C204 C205 C206 C207 C208 C209 C210 C211 C212 C213 C214 C215 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 12B 13B 14B 15B GREEN Page 3 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 C330 C329 C328 C327 C326 C325 C324 C323 C322 C321 C320 C319 C318 C317 C316 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 C230 C229 C2
BOARD LAYOUT: POWER SUPPLY CIRCUIT: PROTO-SHIELD is power supplied via POWER connector from the ARDUINO compatible board with which is used. JUMPER DESCRIPTION: L1_E This jumper, when closed, LED1 is connected to D3 line. This jumper, when opened, LED1 is connected to L1 pad. Default state is closed. L2_E This jumper, when closed, LED2 is connected to D4 line. This jumper, when opened, LED2 is connected to L2 pad. Default state is closed. B1_E This jumper, when closed, BUT1 is connected to D6 line.
B2_E This jumper, when closed, BUT2 is connected to D7 line. This jumper, when opened, BUT2 is connected to B2 pad Default state is closed. INPUT/OUTPUT: Status Led with name LED1 (red) connected via jumper L1_E to DIGITAL connector pin D3 – signal LED1. Status Led with name LED2 (green) connected via jumper L2_E to DIGITAL connector pin D4 – signal LED2. User button with name BUT1 connected via jumper B1_E to DIGITAL connector pin D6 – signal BUT1.
ANALOG: Pin # Signal Name 1 A0 2 A1 3 A2 4 A3 5 A4(SDA) 6 A5(SCL) Note: This connector is not mounted on the board. DIGITAL: Pin # Signal Name 1 D0(RXD) 2 D1(TXD) 3 D2 4 LED1 5 LED2 6 D5 7 BUT1 8 BUT2 Note: This connector is not mounted on the board.
DIGITAL: Pin # Signal Name 1 D8 2 D9(LED2) 3 D10(#SS) 4 D11(MOSI) 5 D12(MISO) 6 D13(SCK/LED1) 7 GND 8 AREF Note: This connector is not mounted on the board. CON-A: Note: This footprint can be used for mounting of SMD IC with 1.27mm pitch. Each of SMD pads is routed to True Hole pad.
CON-B: Note: This footprint can be used for mounting of SMD IC with 0.65mm pitch. Each of SMD pads is routed to True Hole pad.
MECHANICAL DIMENSIONS: Page 9
ORDER CODE: PROTO-SHIELD - assembled and tested board How to order? You can order to us directly or by any of our distributors. Check our web www.olimex.com/dev for more info. Revision history: Board's revision Rev. A, May 2011 Manual's revision Rev.
Disclaimer: © 2011 Olimex Ltd. All rights reserved. Olimex®, logo and combinations thereof, are registered trademarks of Olimex Ltd. Other terms and product names may be trademarks of others. The information in this document is provided in connection with Olimex products. No license, express or implied or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Olimex products.
