User manual

6.6 LAN connector

Pin # Signal name

1 TX+

2 TX-

3 VDD

4 NOT CONNECTED

5 NOT CONNECTED

6 NOT CONNECTED

7 RX+

8 RX-

LED

Color

Usage

Right

Green Link status

Left Yellow Activity status

6.7 Arduino/Maple platform

The Arduino/Maple platform connectors (2x6pin and 2x8pin plastic headers) are not mounted but

are included in the package. The reasons for not mounting the headers on the pin holes are two: first

you might not need them if you do not wish to experiment with Arduino/Maple software; second

there are two rows depending on the shield you might want to use the difference between the two

rows is the distance between the two digital rows one is made according to the Arduino shield

standard (e.g. you want to mount the row there if using Arduino certified shield), the other one is

adjusted properly at 100mil step (e.g. you want to solder the digital pins here if using properly

adjusted shields).

The pinhole names are printed near the actual pinhole on the top of the board.

Arduino platform pinholes

CON1 CON2

Pin Signal Name Processor pin# Pin Signal Name Processor pin#

RST RST 25 A0 PC0 26

3V3 3.3V - A1 PF6 18

5V 5V - A2 PF7 19

GND GND - A3 PF8 20

GND GND - A4 PF9 21

VIN VIN - A5 PF10 22

Page 17 of 30