User manual

OLIMEX© 2013 STM32-E407 user's manual
CHAPTER 9 REVISION HISTORY AND SUPPORT
9. Introduction to the chapter
In this chapter you will find the current and the previous version of the document you are reading.
Also the web-page for your device is listed. Be sure to check it after a purchase for the latest
available updates and examples.
9.1 Document revision
Revision Changes Modified page#
A,
25.07.12
Initial Creation All
B,
02.08.12
Added info about serial monitor
via USB-SERIAL-CABLE
8, 21
C,
20.03.13
Added info about the
bootloader, fixed links
17, 32
D,
10.07.13
Added revision E schematic,
adjusted disclaimer
2, 29
E,
02.12.13
Fixed an error in the table of
Arduino platform headers,
updated customer support page
19, 32
9.2 Board's revision
Revision,
Date
Revision notes
B1,
07.06.12
Initial release
C
FET1 removed; the TVS symbol fixed (both near the input power).
It is unidirectional and helps with the data protection.
D The PHY was changed and all libraries were updated.
Page 28 of 30