User manual

1. R5 was changed from 10k/1% to 10k;

2. R70(0R) was changed to 10k and renamed to R13, added was

C26=10uF/6.3V and RST connection was removed from the PHY!;

3. SD/MMC package was changed to the newer version (much more

universal);

4. WKUP and RESET packages were changed to WS-

TAKT_6X3.5_SMD_NOCREAM;

5. Everything is renumbered, so there are no missing numbers.

6. C4 was changed from 100nF to 10uF/6.3V;

7. Added is R54 = 47k pull-up to Rx line;

9.3 Useful web links and purchase codes

The web page you can visit for more info on your device is

https://www.olimex.com/Products/ARM/ST/STM32-E407/.

You can get the latest updates on the software at: https://github.com/OLIMEX/STM32F4.

ORDER CODES:

STM32-E407 – the version of the board discussed in this document

STM32-H407 – the smaller version of the board without Ethernet

ARM-USB-TINY-H – OpenOCD compatible high-speed debugger/programmer with JTAG

interface

ARM-USB-OCD-H – OpenOCD compatible debugger/programmer with JTAG interface,

protection buffers and better power supply circuit

SY0612E - power supply adapter 12V/0.5A for STM32-E407 – 220V (European compatibility)

How to order?

You can order directly from our web-shop or by any of our distributors.

Check https://www.olimex.com/ and https://www.olimex.com/Distributors/ for more info.

Page 29 of 30