User manual

4.2 LEDs

There are four LEDs on TMS320-XDS100v3. Two for indicating power input and power output and

two for the current board-mode.

4.2.1 Power LEDs

The PWR_LED shows whether the board is powered. The PWR_EN shows whether the board can

power the target.

4.2.2 D3 and D4

The D3 and D4 LEDs show the state of, respectively, J4 and J5 jumpers.

4.3 Jumpers

There are two PTH jumpers on TNS320-XDS100v3. They are responsible for the emulation –

adapter configuration. When J4 and J5 are open – the chosen mode is emulator mode. When J4 an

J5 are closed the chosen mode is adapter.

For general use of the XDS100v3 as emulator and debugger, please, keep jumpers J4 and J5 open.

Page 13 of 16