User manual

CHAPTER 1 OVERVIEW

1. Introduction to the chapter

Thank you for choosing the TMS320-XDS100v3 emulator from Olimex! This document provides a

user’s guide for the Olimex TMS320-XDS100v3. As an overview, this chapter gives the scope of

this document and lists the board’s features. The differences between the members of the TMS320-

XDS100v3 family are mentioned. The document’s organization is then detailed.

The emulator is based on design provided and distributed by Texas Instruments.

1.1 Features

Among the features of the XDSv3 design are:

• TMS320-XDS100V3 hardware is designed to work with CCS 5.x software

• IEEE 1149.7 capable emulator with a USB interface.

• Can function as an 1149.7 adapter for use with existing scan controllers.

• Support for ARM Ltd's Single Wire Output (SWO).

• Software compatible with XDS100v2 (except link delay and IEEE 1149.7 modes).

• Grants free license for TI's Code Composer Studio 5.

• Supported in IAR EW for ARM (for IAR versions after 6.40).

• Physical jumper to select emulator or adapter mode.

• Operates in 1149.7 Class 4, up to 25MHz.

• LED to indicate IEEE 1149.7 Class 4 operation.

• LED to indicate operation in adapter mode.

• Supported devices: TMS320C28xx, TMS320C54xx, TMS320C55xx, TMS320C674x,

TMS320C64x+, TMS320C66x, ARM9, ARM Cortex A9, ARM Cortex A8, ARM Cortex

M3, ARM Cortex R4

• Works with targets in the 1.65 – 5.0V range

• Uses standard 0.1" 2x7 pin and 0.1'' 2x10 pin JTAG connectors (both with TI JTAG layout)

• All units, manufactured after 01.02.2014, also include a 2x10 pin ARM JTAG layout

adapter. It makes the connection to a board that features a supported ARM core target

easier.

• Suitable for ARM 14 pin and ARM 20 pin layouts via adapter or jumper wires

• No need for external power supply, all required power is taken from USB and the target

• Dimensions 95x46 mm (3.75x1.8") + 2x15 cm (8") cables

For full list of features visit the TI's wiki address:

http://processors.wiki.ti.com/index.php/XDS100#XDS100v3_Features

Page 4 of 16