Operation Manual

GB
F
D
40
I
TROUBLE SHOOTING
PROBLEM
The dehumidier will not work.
• The dehumidier will not dehumidify.
• The dehumier works but does not reduce
the humidity in the room.
The ashing “Hr” alarm code appears on the
display.
The ashing “tE” alarm code appears on the
display.
The ashing “Lo” alarm code appears on the
display.
SUGGESTED SOLUTION
Insert the plug or make sure there is voltage.
• Set to the desired position.
• Empty the tank.
• It is normal in certain conditions for the
appliance not to dehumidify.
Activate the dehumidier with higher ambient
humidity conditions.
Switch off the appliance and contact an
authorised technical service centre.
Switch off the appliance and contact an
authorised technical service centre.
Activate the dehumidier in hotter conditions.
If the alarm persists, contact an authorised
service centre.
LIKELY CAUSE
Plug not connected.
• Humidistat set to minimum.
• Tank full of water.
• The temperature and humidity in the room are
too low.
• Room too large.
• In the room there are powerful sources of
humidity (boiling pans).
The ambient humidity is too low.
The ambient temperature and humidity sensor
is damaged.
The ambient evaporation temperature sensor
is damaged.
The ambient temperature is too low.
INDIVIDUAZIONE DI ANOMALIE DI FUNZIONAMENTO
CAUSE
Spina non collegata.
• L’umidostato è regolato sul minimo.
• La tanica è piena d’acqua.
• Le temperature e l’umidità nell’ambiente sono
troppo basse.
• Locale troppo grande.
• Nel locale vi sono troppe fonti di umidità
(pentole in ebollizione).
L’umidità ambiente è troppo bassa.
Il sensore di temperatura e umidità ambiente
è danneggiato.
Il sensore di temperatura di evaporazione
ambiente è danneggiato.
La temperatura ambiente è eccessivamente
bassa.
RIMEDI
Inserire la spina o accertarsi che vi sia
tensione.
• Regolare nella posizione desiderata.
• Vuotare la tanica.
• È normale che in certe condizioni
l’apparecchio non deumidichi.
Attivare il deumidicatore in condizioni di
umidità ambiente più elevate.
Spegnere l’apparecchio e contattare il centro
assistenza autorizzato.
Spegnere l’apparecchio e contattare il centro
assistenza autorizzato.
Attivare il deumidicatore in condizioni di
temperatura ambiente più elevate.
Se l’allarme persiste contattare il centro di
assistenza autorizzato
MANIFESTAZIONI
Il deumidicatore non funziona
.
• Il deumidicatore non deumidica.
• Il deumidicatore funziona ma non riduce
l’umidità nel locale.
Sul display compare il codice allarme “Hr”
lampeggiante.
Sul display compare il codice allarme “tE”
lampeggiante.
Sul display compare il codice allarme “Lo”
lampeggiante.
GB
I