User Manual
Warranty Oliso, Inc. warrants that for a period of one year from the date of the original purchase, this product will be free from defects in material and workmanship, when utilized for normal household use. Oliso, Inc. will repair or replace this product or any component of the product found to be defective during the warranty period without charge to the customer. If a replacement product is sent, it will carry the remaining warranty of the original product.
IMPORTANT SAFETY INSTRUCTIONS When using your iron, basic safety precautions should always be followed, including the following: Read all instructions before using this product. 1 ) Use iron only for its intended use. 2 ) To protect against a risk of electric shock, do not immerse the iron in water or other liquids. 3 ) The iron should always be turned to “Off” before plugging or unplugging from the outlet. Never tug cord to disconnect from the outlet; instead, grasp plug and pull to disconnect.
3 Simple Steps To Start 1 iTouch™ Technology To operate, place the iron, soleplate down, on a flat surface. Plug the iron into an outlet and make sure the iTouch™ switch is in the ON position. FILL UNPLUGGED Open the Flip Funnel™ and add water to the tank with the fill cup or directly from a faucet. Note: 2 fill cups equal the max capacity of the water tank. 2 Simply touch the iron handle, and the iron will sense your hand and lower.
Water Tank Getting To Know Your Oliso® Smart Iron™ 1 2 3 4 8 5 9 Before filling, slide the steam selector to off ( ). Make sure the iron is unplugged. 10 11 6 Open the Flip Funnel™. 7 If you need to add water during ironing, unplug the iron and repeat the above steps. After filling, make sure the iron is fully reheated before ironing. 12 WATER RECOMMENDATIONS 13 1. Status Light 2. Steam Burst 3. Spray Mist 4. Steam Selector 5. Fabric Selector 6. Spray Nozzle 7.
Fabric Selector FABRIC SELECTOR Extreme Steam Triple Play STATUS LIGHT Steam Selector: Slide the steam selector to set the amount of continuous steam. The iron can only produce steam when the fabric selector knob is set to the wool ( •• ), cotton, or linen range (•••). Allow the iron to heat up (solid green status light) before activating the steam control. Steam will be produced as soon as the iron is lowered. Steam will stop when iron lifts up.
Auto Shut-off System If the Oliso® Smart Iron™ is not being used while it is plugged in, the status light will flash red and the iron will turn itself off. Iron Position iTouch™ ON Simply touch the handle of the iron to restart it.
Trouble shooting guide PROBLEM Iron does not heat Scorch guards do not come out Iron does not steam THINGS TO CHECK Turn the fabric selector knob to a fabric setting. Is iron plugged in correctly? Check to make sure the plug is fully plugged into the socket. Is Auto shut-off system activated? Touch the handle. Is iTouch™ switch set to off? Set the switch on the back of the iron to the ON position. Is iron plugged in correctly? Check to make sure the plug is fully plugged into the socket.
