Olive Union User Manual Olive is a device that controls the ambient sound for people with normal hearing. Olive is not a medical device and cannot replace diagnosis, treatment or physical function. High volume can damage your hearing if used for long periods. Thank you for making your first meeting with Olive.This manual contains the basic information you need to understand and use Olive.Please refer to it before using the product to meet your daily routine.
- AC Adapter 3 types of silicon tips (one each large, medium and small) - Three foam eartips (one large, one medium and one small) Basic usage * Olive status can be checked by LED light and guide sound. If you operate the olive with your hands, you may not hear the guide sound. When operating the touch sensor on the top of the product, please check the LED light. Charging If you use the olive for the first time after purchase or leave it for a long time, please charge the battery before use. 1.
2. d. The olive LED light will turn on and off slowly during charging. e. After about one hour, the Olive LED will turn off. f. charger Charging method a. Connect the AC adapter and charging cable. b. Connect the USB cable to the charging port on the charger. c. Check the charge d. The LED on the left of the charging port glows green during charging. e. After about 2 hours, the charger LED will turn off.
3. 4. 5. Pairing a. Press the touch sensor for 4 seconds. b. The LED will blink left and right and pairing mode will be activated. c. When the pairing of olive and smartphone is completed, LED lighting is turned off. Volume control a. Volume up b. Touch the touch sensor twice shortly. c. You will hear a high-frequency beep and the sound will be loud. Volume down a. Touch the touch sensor briefly once. b. You will hear a low-frequency beep and the sound will be quiet.
b. After completing the 5 guides, you are ready to use Olive. c. Getting started i. 4. Check the olive components and how to properly wear them. d. Olive registration e. Connect olive and smartphone, the application. f. Hearing test g. Explain the screening of the Hearing Test Result Report. h. Ease of Use (Equalizer + Easy Setting) i. Home screen Easy setting, equalizer usage, and screen configuration. Olive Application Introduction a.
* Menu screen image Feedback Cancelation Reduces feedback noise in real-time. HOME (Deactivated when the olive is not Equalizer registered.) Moves to the equalizer setting screen. Go to the home screen for easy use. Volume control Usage Guide Adjust the volume. You can see the guide again. Battery Olive list Check the battery level. You can view the list of olives and add & delete them.
Lose. Find Olive Return to the app and press the “Next” button On the olive find screen Press the "Find" button to search for olives to register in the app. Register for ⬜ Olive Check the detected olives and press the "Add" button to complete. * IOS device pops up a “Bluetooth Connection Request” popup window. Please press the "Connect by Pair" button and follow the same procedure. Hearing test * Please check before starting. Have you registered olives? Check out the Olive Connection manual.
a. Examine the opposite ear for accurate hearing correction. b. Place the olive on the other side of the ear where the test was done and do one set of calibration tests. 4. Result Synchronization a. The test results are synchronized with the olive. b. Olive will turn off after synchronization. If you use it immediately, please use the olive power. To use the app's features, go to the Olive menu in the app and connect the olive you want to use. Equalizer * Please check before starting.
Talk 500 ~ 6000Hz is the range of speech sound. Adjust this frequency when you want to focus on the conversation Ambient sound section 500, 4000, 6000, and 8000 Hz are in the low and high ranges. In case of noise, please adjust this section. FAQ 1. Do I need a smart device to use Olive? There are only two cases where you need a smart device when using Olive.
Olive is a mono type, only one at a time You can connect with the mart device. Other olives when multiple olives are on May be connected. Unplug any olives other than the one you want to connect. Please turn off. Check Power Insert the olive into your ear and press the touch sensor once. If you do not hear a dial tone, the power is off. Turn it on or plug it into a charger. If you don't see the headphones icon Reconnect Bluetooth.
Be careful not to block the olive microphone holes at the same time. 6. During music playback and calls, only one hearing aid will make a sound. Olive is a mono type, so when connected with a smart device, only one is connected at the same time. 7. Falls from the ear We recommend replacing the ear tip to fit the ear canal size and adjusting it so that it rests as much as possible. 8. I have a Bluetooth connection with my smart device but I cannot connect with the app.
