Warranty

Unpacking and Getting Started
1. Carefully unpack the contents of the box. Check that it is all in good condition.
2. Check that the power cord has the correct plug for your country.
3. Connect the 12V transformer plug to the cable at the back of the Robin unit.
4. Plug the transformer into the mains power socket of the room, and make sure the
power is on.
5. Switch on the clock power at the small switch on the back and correctly set the
time using the time setting knob.
+-
Connecting to bluetooth and playing audio
1. Press the Blue pairing button for 2-3 seconds so that it starts fl ashing.
2. Then open your Bluetooth settings in your phone and search for “Oliver Hemming
Robin Speaker Clock” in the available devices section, and then connect to it.
3. Turn up the volume on your phone and on the top of the Robin to maximum.
4. Play your audio from your phone, and adjust the volume on the Songbird or with
your phone.
5. For best results, turn up the volume on your phone to about 70% of its maximum
and then adjust the Robin using the set top controls to the volume you want.
If the output volume is too low from your phone then you may get poor quality
audio playback.
6. Use the Play / Pause either on the Robin or in your phone controls.
7. If you have no sound, check the volume in your phone and on the set top
controls. Check you have power and a bluetooth connection. Check that your
audio media is playing and not in pause mode by pressing the