Specifications Sheet

OPTIONAL ACCESSORIES
INCLUDED ACCESSORIES RECOMMENDED TAPWARE
® Registered trademark of Tasman Sinkware. Under its policy of ongoing product development Tasman Sinkware may from time to time change product specification without notice.
All dimensions given are approximate and should be checked prior to installation. See Oliveri installation instructions for installation details.
For more information call 1300 13 7465 or visit www.oliverisinks.com
SPECIFICATIONS
facebook.com/
OliveriAU
twitter.com/
OliveriAU
pinterest.com/
OliveriAU
AP1421
Apollo
AC28
ACP104F ACP110
ACP101
ACP134ACP124
ACP105
ACP100
Description
Single bowl inset sink with drainer
Sink Size
800W x 500H
Main Bowl
355W x 405H x 200D / 29L
Construction Fabricated with 18mm radius corners, Softtone® and soundproofing.
Material 304 grade, 18/10 brushed stainless steel (1.2mm thick)
Installation Inset or undermount
Fixings Topmount clips supplied
Cut Out Template 780 x 480 x 10mm radius
Min Cabinet Size 500mm
Tap holes Available 1 tap hole only (suitable for additional tap holes)
Waste fittings 1 x 90mm basket waste included
Overflow Not available
Carton Size TBC
Weight TBC
Warranty Lifetime manufacturer’s warranty (refer to oliverisinks.com)
405
167.5
500
R18
800
355
350
7
200
CAD Drawing: AP1421
ACP109
Australia’s
Sink
Manufacturer
VT0392B VT0398B
WELS 4 star
6.5 L per min
WELS 4 star
6.5 L per min
LEFT HAND BOWL
V2