Specifications Sheet

OPTIONAL ACCESSORIES
INCLUDED ACCESSORIES RECOMMENDED TAPWARE
® Registered trademark of Tasman Sinkware. Under its policy of ongoing product development Tasman Sinkware may from time to time change product specification without notice.
All dimensions given are approximate and should be checked prior to installation. See Oliveri installation instructions for installation details.
For more information call 1300 13 7465 or visit www.oliverisinks.com
SPECIFICATIONS
facebook.com/
OliveriAU
twitter.com/
OliveriAU
pinterest.com/
OliveriAU
UF13D
Ultraform
AC14
AC01
LP01 LP02 AC16 AC29
PA113/2 MV617/6
Description
Double bowl inset sink with double drainer
Sink Size
1385W x 470H
Deep Bowl
330W x 385H x 190D / 21L
Deep Bowl
330W x 385H x 190D / 21L
Construction 2 piece, bowls & drainer seam welded
Material 304 grade, 18/10 polished stainless steel (0.8mm thick)
Installation Inset recommended.
Fixings Adjustable clips and sealing foam supplied
Cut Out Template 1365 x 460 x 15mm radius
Min Cabinet Size 800mm
Tap holes Available 0 or 1 tap hole (specify when ordering)
Waste fittings 2 x 90mm basket wastes included
Overflow Not available
Carton Size 1395 x 480 x 210mm
Weight 8.5kg
Warranty Lifetime manufacturer’s warranty (refer to oliverisinks.com)
1365 x 450 x 15mm radius