Operation Manual

10
• To enter a space between characters, press .
• If the same key has to be used for successive letters of a caption, press between the two letters.
• Any incorrect character can be canceled by pressing which provides the typical backspace function of the PC
environment.
• To toggle between capital letter ON/OFF, press .
• Confirm your final caption by pressing .
• To exit Data Entry mode, press .
Example: Enter the word BOOKS. Press
NOTE: To abort a partially entered programming sequence, you can use .
USING THE CHARACTER TABLE
The Character Table provides all the letters and symbols that your cash register is capable of printing. With reference to
figure 12, the Character Table is divided into two parts: one identified with "CAPS" at the top left-hand corner and to
be used with the CAPS mode activated, the other identified with "Non CAPS" to be used with the CAPS mode
deactivated.
• To toggle the cash register between the CAPS and Non CAPS mode, press the key . When the cash register is in
the CAPS mode (the default), an
A is displayed at the bottom left of the display.
To use the character table:
• First look for the letter or symbol wanted and then identify its corresponding letter listed in the first column on the left.
• Switch the cash register to the CAPS or Non CAPS mode depending in which part of the table the letter or symbol you
want is located.
• Press the letter key on the keypad the number of times necessary to select the character, as indicated by the
corresponding number on the row at the top of the table.
• Confirm your final caption by pressing .
Example: Select the letters à and Ü:
1. Position on the field for which you want to enter a caption and press to enter Data Entry mode.
2. For Ü, in CAPS mode, press .
3. For à, in Non CAPS mode, press:
.
4. Press to confirm.
5. To exit Data Entry mode, press .
SP
SP
CAPS
ENTER
EXIT
B
O
SP
O
K
S
ENTER
CAPS
ENTER
U
U
U
A
A
A
A
ENTER
EXIT