Operation Manual
Table Of Contents
- CONTENTS
- MAJOR FEATURES
- PROGRAMMABLE FEATURES
- CASH REGISTER COMPONENTS
- OPERATOR AND CUSTOMER DISPLAYS
- CASH REGISTER FUNCTIONS
- USING THE MENUS
- CAPTION PROGRAMMING
- QUICK START PROGRAMMING
- SALES PROGRAMMING
- CONFIGURING YOUR CASH REGISTER
- LOGGING ONTO THE SYSTEM
- PRINTING PROGRAMMING REPORTS
- USING THE MEMORY STORAGE DEVICE (SD)
- SYSTEM INITIALIZATION
- MANAGEMENT REPORTS
- SALES TRANSACTION EXAMPLES
- CUSTOMER OR TABLE MANAGEMENT
- ERROR CONDITIONS
- CASH REGISTER RESET OPERATIONS
30
Popup List
Function
The cash register has four
[POPUP LIST
x
]
keys for sales functions:
, , , .
A fifth key, [POPUP LIST 5], is available and can be mapped onto a key if required.
In Registration mode, when one of the [POP-UP LIST] keys is pressed, a list of operations is
displayed allowing you to select one to execute.
From Popup List Function, you can reprogram the operations displayed in the list by
specifying the operations for each list. When you select this option, the programming for
[POP-UP LIST1] is displayed first. To display the next [POP-UP LIST x] press
.
The form displayed contains a list of all the sales functions that can be programmed for the pop-
up list. Those indicated as
YES
are those currently displayed in the list, those indicated as
NO
are
not. You can change the settings by specifying
YES
for each operation to include in the list.
Set RESTORE DEFAULT to YES to restore the default settings for the pop-up lists at any time.
Chain Functions You can associate a 5-key sequence with each of the chain functions from
[
CHAIN
FUNCTION1]
to
[
CHAIN FUNCTION5
]
to simplify and speed up the entry of repetitive cash
register operations. As the [CHAIN FUNCTIONx] keys are not provided by default on the
keyboard, you must first of all map the key you want to use onto a key as described in Free
Key Layout above. You can then program the key sequence that must be executed whenever
the [CHAIN FUNCTIONx] key is pressed. How to do this is explained by means of an example
below.
Example: Let’s assume that
[
CHAIN FUNCTION1
]
is mapped onto the key
. To register
a cash payment of £10.00 every time this key is pressed:
1. Select
Programming Mode -> Configuration Setup -> Advanced settings -> Chain Functions.
2. Press
.
3. Enter the key sequence by pressing: .
4. Press again.
NOTE: The
[CHAIN FUNCTION
x
]
keys themselves
cannot be used in a chain function,
nor can the following:
, , , , , , , , , ,
While programming a chain function, the keys
and cannot be used.
Chain Report You can program 5 chain reports. For each report, you can select the entities to be included by
changing their values from NO to YES for: Department & Financial, Department Group, All
PLUs, Sales Clerk, Training Clerk, Hourly Report, Training, Dept & Financial Grand Total, Full EJ.
Manager
Password
See below.
Menu Item Description