Operation Manual
Table Of Contents
- CONTENTS
- MAJOR FEATURES
- PROGRAMMABLE FEATURES
- CASH REGISTER COMPONENTS
- OPERATOR AND CUSTOMER DISPLAYS
- CASH REGISTER FUNCTIONS
- USING THE MENUS
- CAPTION PROGRAMMING
- QUICK START PROGRAMMING
- SALES PROGRAMMING
- CONFIGURING YOUR CASH REGISTER
- LOGGING ONTO THE SYSTEM
- PRINTING PROGRAMMING REPORTS
- USING THE MEMORY STORAGE DEVICE (SD)
- SYSTEM INITIALIZATION
- MANAGEMENT REPORTS
- SALES TRANSACTION EXAMPLES
- CUSTOMER OR TABLE MANAGEMENT
- ERROR CONDITIONS
- CASH REGISTER RESET OPERATIONS
36
SYSTEM INITIALIZATION
This section explains how to set system initialization parameters. This procedure is also described in the “Quick Start
Programming”. Select
Main menu -> Programming Mode -> System Initialization. Navigate to the field you want to
personalize and enter its data (see “Data Entry Mode” for the keys to use).
At the end, select
YES
for the prompt
Are you sure?
and press
.
Press to return to the Main menu or
to return to the previous menu.
WARNING: Execution of system initialization erases all programming of the cash register, restoring the
default values.
MANAGEMENT REPORTS
Transaction data is maintained in the memory of the cash register as long as the battery back-up system is in effect.
This data can be printed as a report for management review. The Management Report can be printed in either X or Z
report mode. If a password is set up for PRG&Z mode or X mode you must enter it before you can access, respectively,
Z Report mode or X Report mode (see “Setting Up Manager Passwords” for how these passwords are set up).
Menu Item Possible Values Description
Language ENGLISH, SPANISH,
FRENCH, GERMAN,
DUTCH, PORTUGUESE,
DANISH, NORWEGIAN
Set the language you require for the cash register from the 8
languages available:
PLU/EJ/Table 1500 PLU/12000 EJ/0
TABLE
2000 PLU/11000 EJ/ 0
TABLE
3000 PLU/ SD/0 TABLE
500 PLU/ 12000 EJ/50
TABLES
1500 PLU/ 9000 EJ/70
TABLES
3000 PLU/SD/100 TABLES
Set the maximum number of PLUs that can be stored on the cash
register, the maximum number of tables that can be tracked
simultaneously and the type of device you want to use for storing
Electronic Journal data, either:
• Cash register internal memory
• Storage Device (SD) - memory card
The SD card can be used in alternative to the internal memory,
leaving more capacity for the storage of PLU codes. The number of
transaction lines that can be stored depends on the capacity of the
card. For example, a 1GB card provides storage for 40 million
transaction lines.
The possible choices are:
1500/12000/0 - 1500 PLU codes & max. 12000 lines stored in
internal memory, no table tracking
2000/11000/0 - 2000 PLU codes & max. 11000 lines stored in
internal memory, no table tracking
3000/SD/0 - 3000 PLU codes & storage on SD card only, no table
tracking
500/12000/50 - 500 PLU codes & max. 12000 lines stored in
internal memory, max. 50 tables can be tracked
1500/9000/70 - 1500 PLU codes & max. 9000 lines stored in
internal memory, max. 70 tables can be tracked
3000/SD/100 - 3000 PLU codes, storage on SD only, max. 100
tables can be tracked.
When the SD card is chosen for EJ storage instead of internal
memory, you must also set
Electronic Journal -> EJ System -> SD
before it is fully operational.
SW Download NO, YES Download software from the PC (when connected). YES - Enable,
NO - Disable. If this is selected, PLU/EJ/Table memory settings are
ignored.
A special utility must be installed on the PC in order for this
functionality to work.
ARE YOU
SURE?!
YES, NO Confirm changes made to system initialization settings (see
WARNING above): YES - Apply changes, No - No change.