Operation Manual

21
ENGLISH
VV
VV
V
alue alue
alue alue
alue
Added Added
Added Added
Added
TT
TT
T
ax (Vax (V
ax (Vax (V
ax (V
AA
AA
A
T) RaT) Ra
T) RaT) Ra
T) Ra
testes
testes
tes
Up to four VAT rates (VAT 1, VAT 2, VAT 3 and VAT 4) can be preset
in the cash register. A maximum 5-digit VAT rate can be programmed
(0-99.999%).
Setting a FixSetting a Fix
Setting a FixSetting a Fix
Setting a Fix
ed ed
ed ed
ed
VV
VV
V
AA
AA
A
T RaT Ra
T RaT Ra
T Ra
tete
tete
te
Proceed as follows to program a fixed tax rate:
1. Turn the PRG key to the PRG position.
2. Type the [numbers] which represent the VAT (1 for VAT 1, 2 for
VAT 2, 3 for VAT 3 and 4 for VAT 4).
3. Press the [Tax Set] key. The message "VAT n RATE" appears on the
operator display where n is the number representing the VAT rate.
4. Type the VAT rate. Up to five digits can be used, and you MUST
enter three digits after the desired decimal place. For example, to
enter a 5.5% VAT rate, type [5500]; to enter a 7% VAT rate, type
[7000].
5. Press the [Amt Tend/TOTAL] key.
NOTE: If you make an error, press the [Clear] key and start again
from step 3.
6. Program another feature or exit program mode by turning the PRG
key to the OFF position.
Example: Set a VAT 1 rate of 5.5%, VAT 2 rate of 7%, VAT 3 rate of
15% and a VAT 4 rate of 20%.
Type/Press:
[1] + [Tax Set] + [5500] + [Amt Tend/TOTAL]
[2] + [Tax Set] + [7000] + [Amt Tend/TOTAL]
[3] + [Tax Set] + [15000] + [Amt Tend/TOTAL]
[4] + [Tax Set] + [20000] + [Amt Tend/TOTAL]
NOTE: The programmed VAT rates are identified on the sales receipt
with the following printed symbols: TI for VAT 1, TII for VAT
2, TIX for VAT 3 and TIIZ for VAT 4.
High DigHigh Dig
High DigHigh Dig
High Dig
it Locit Loc
it Locit Loc
it Loc
k Out (HDLO) and k Out (HDLO) and
k Out (HDLO) and k Out (HDLO) and
k Out (HDLO) and
TT
TT
T
ax Staax Sta
ax Staax Sta
ax Sta
tustus
tustus
tus
Assigned to the Minus KAssigned to the Minus K
Assigned to the Minus KAssigned to the Minus K
Assigned to the Minus K
ee
ee
e
y (-)y (-)
y (-)y (-)
y (-)
You can limit the number of digits, i.e. the maximum value of a
minus key operation, from 1 to 7 digits. This makes sure that minus key
amounts do not exceed a maximum amount. You can also assign a VAT
rate or a non tax status to the minus key. Make your selections for this
feature from the following options:
High Digit Lock Out Taxation
0 = 7 digits (99999.99) 00 = Non taxable
1 = 1 digit (0.09) 01 = VAT 1
2 = 2 digits (0.99) 02 = VAT 2
3 = 3 digits (9.99) 03 = VAT 3
4 = 4 digits (99.99) 04 = VAT 4
5 = 5 digits (999.99)
6 = 6 digits (9999.99)
PrPr
PrPr
Pr
ogramming the High Digogramming the High Dig
ogramming the High Digogramming the High Dig
ogramming the High Dig
it Locit Loc
it Locit Loc
it Loc
k Out and k Out and
k Out and k Out and
k Out and
TT
TT
T
ax Staax Sta
ax Staax Sta
ax Sta
tustus
tustus
tus
1. Turn the PRG key to the PRG position.
2. Type the HDLO code [0-6].
3. Type the tax status code [00-04].
4. Press the [-] key.
5. Program another feature or exit program mode by turning the PRG
key to the OFF position
Example: Allocate a maximum of 5 digits and VAT 2 to the minus key.
Type/Press:
[5] + [02] + [-]