Operation Manual

ManualsBrandsOlivetti ManualsMiscellaneousECR2300

ENGLISH

Linking an HDLOLinking an HDLO

Linking an HDLO

ax Staax Sta

ax Sta

tustus

tus

P P

osos

./ Neg../ Neg.

./ Neg.

Single/Multiple Single/Multiple

Single/Multiple

Item Cash Sale and Item PrItem Cash Sale and Item Pr

Item Cash Sale and Item Pr

ice to a Defice to a Def

ice to a Def

inedined

ined

DeparDepar

Depar

tmenttment

tment

1. Turn the PRG key to the PRG position.

2. Type the [Activate department], [Department definition], [Pos./

Neg. Single/Multiple Item Cash Sale], [HDLO] and [Tax Status]

options by referring to the previous table. A six-digit status code

must be entered.

3. Press the [Subtotal w/Tax] key to confirm your entry. The message

"DEPT PRICE" appears on the displays.

4. Type a [price] of up to 7 digits to assign to a specific item and then

press the relative [Department] key.

5. Program another feature or exit program mode by turning the PRG

key to the OFF position.

Example: Assign a 5-digit HDLO, VAT 1, positive multiple item sale,

a price of £2.50 to an item in activated standard Department 1.

Type/Press:

[0] + [1] + [0] + [5] + [01] + [Subtotal w/Tax] + [250] +

[Department 1/21]

PrPr

ice Look-Ups (PLUs)ice Look-Ups (PLUs)

ice Look-Ups (PLUs)

Price Look-Ups simplify cash register operations by automatically

registering an individual item's price (up to 500 can be registered),

department number, tax status and rate (if applicable). To look up

individual item prices, simply type the item's corresponding PLU

number [1] and press the [PLU] key.

CrCr

eaea

ting Prting Pr

ting Pr

ice Look-Upsice Look-Ups

ice Look-Ups

Proceed as follows to create a price look-up:

1. Turn the PRG key to the PRG position.

2. Press the [Qty/Time] key. The message "PLU001 PRI" appears on

the displays, informing you of the PLU number (001). If you wish to

change the PLU number from 001 to another number such as 30,

type [030] and then press the [PLU] key.

3. Type the [unit price] that you wish to assign to that PLU.

4. Press the appropriate [Department] key to assign the PLU to a

Department from 1 to 20. Use the [Dept Shift] key for departments

from 21-40.

5. Press the [Qty/Time] key to program another feature, otherwise exit

the program mode.

Example: Create PLU 1 with a unit price of £2.69 assigned to Depart-

ment 3 and then create PLU 320 with a unit price of £5.00 assigned to

Department 33.

Type/Press:

[Qty/Time] + [269] + [Department 3/23] + [320] + [PLU] + [500] +

[Dept Shift] + [Dept 13/33] + [Qty/Time]

EurEur

Eur

o Exchange Rao Exchange Ra

o Exchange Ra

te Prte Pr

te Pr

ogrammingogramming

ogramming

You can program the Euro exchange rate so that the cash register can

automatically calculate the transaction from your local currency into the

Euro currency and vice versa depending on the cash register's base

currency (Local or Euro). The cash register is programmed by default so

that your local currency is the base currency. If you wish to change the

base currency to Euro, refer to the "Programming System Options"

section in this manual, Machine Condition 30.

PrPr

ogramming the Eurogramming the Eur

ogramming the Eur

o Exchange Rao Exchange Ra

o Exchange Ra

tete

Euro exchange rate programming consists of firstly defining the

position of the decimal point of the Euro exchange rate (0-8 digits after

the decimal point), the position for the decimal point of the changed

amount which is also printed on the sales receipt (0-3 digits after the

decimal point), and then the actual current exchange rate (up to 5

digits). To provide you with the Euro currency value, the cash register

divides the local currency value by the exchange rate defined.