Operation Manual

ManualsBrandsOlivetti ManualsMiscellaneousECR2300

ChangChang

Chang

ing the Cash Reging the Cash Reg

ing the Cash Reg

ister's Standarister's Standar

ister's Standar

d Settingsd Settings

d Settings

Proceed as follows if you wish to change any of the standard machine

settings indicated in the previous table:

1. Turn the PRG key to the PRG position.

2. Type the [number] of the machine condition (1-30 as indicated in

the table) that you wish to alter. Machine conditions 19, 20 and 26

are reserved and cannot be changed.

3. Type the [number] of the required setting.

4. Press the [Void] key.

5. Program another feature or exit the program mode by turning the

PRG key to the OFF position.

Example: Program the cash register so that the date is printed in the

MM/DD/YY format.

Type/Press:

[4] + [0] + [Void]

PLU PrPLU Pr

PLU Pr

ogramming Dump Reporogramming Dump Repor

ogramming Dump Repor

If a large number of PLUs are created (bear in mind that up to 500

PLUs can be programmed), a separate receipt can be printed indicating

all the PLUs programmed. Their number, associated price, VAT rate

indicator (if applicable) and associated department are reported on this

receipt, which should be kept in a safe place for future reference.

PrPr

inting an inting an

inting an

All PLU Dump ReporAll PLU Dump Repor

All PLU Dump Repor

Proceed as follows to print a PLU report:

1. Turn the PRG key to the PRG position.

2. Press the [PLU] key to print the list.

3. Turn the PRG key to the OFF position to exit the program mode.

Shown below is an example PLU dump report.

Machine number

Date

Item price and

associated VAT

Time

Consecutive

receipt number

PLU number