Operation Manual

ENGLISH

Adding a PAdding a P

Adding a P

erer

cent Plus Racent Plus Ra

cent Plus Ra

te to Individual Items Usingte to Individual Items Using

te to Individual Items Using

the Prthe Pr

the Pr

ogrammeogramme

ogramme

d Rad Ra

d Ra

tete

Up to four digits can be used for the percent plus rate (0-99.99%).

You MUST enter two digits after the decimal position.

Example: Register a programmed 3% percent plus rate on a £3.00 item

to Department 5, and a £2.50 item to Department 4. Compute the

change tender.

Proceed as follows:

1. Type [300] and press the [Department 5/25] key.

2. Press the [+%/PO] key to apply the programmed percent plus rate.

The amount added on is displayed.

3. Type [250] and press the [Department 4/24] key.

4. Press the [Subtotal w/Tax] key to display the current balance due.

5. Type the amount tendered [600] and press the [Amt Tend/TOTAL]

key. The change due to the customer is displayed and the transaction

ends successfully.

Amount added on

Programmed percent plus rate