Operation Manual

55
ENGLISH
Adding the PrAdding the Pr
Adding the PrAdding the Pr
Adding the Pr
ogrammed Pogrammed P
ogrammed Pogrammed P
ogrammed P
erer
erer
er
cent Plus Racent Plus Ra
cent Plus Racent Plus Ra
cent Plus Ra
te (+%) tote (+%) to
te (+%) tote (+%) to
te (+%) to
One ItemOne Item
One ItemOne Item
One Item
Up to four digits can be used for the percent plus rate (0-99.99%).
You MUST enter two digits after the decimal position.
Example: Register a programmed 3% add-on to a £.99 cash transaction
to Department 7.
Proceed as follows:
1. Type [99] and press the [Department 7/27] key.
2. Press the [+%/PO] key to apply the programmed percent plus rate.
The amount added on is displayed.
3. Press the [Subtotal w/Tax] key to display the current balance due.
4. Press the [Amt Tend/TOTAL] key to end the transaction with a
correct cash tender.
PLU CodesPLU Codes
PLU CodesPLU Codes
PLU Codes
RegReg
RegReg
Reg
isterister
isterister
ister
ing a Sales ing a Sales
ing a Sales ing a Sales
ing a Sales
TT
TT
T
ransaction Using Prransaction Using Pr
ransaction Using Prransaction Using Pr
ransaction Using Pr
eset PLUeset PLU
eset PLUeset PLU
eset PLU
CodesCodes
CodesCodes
Codes
In order to be able to use this feature, PLU codes must have been
previously set. Turn to the section entitled Setting PLU Codes for
information on how to define a PLU to an individual item.
Example: Use preset PLU codes to register an entire transaction:
register PLU 1 and multiply 3 PLU 2. Compute change for a cash
tender.
Proceed as follows:
1. Type [1] followed by the [PLU] key.
2. Type [3] followed by [Qty/Time], then press [2] followed by the
[PLU] key. The amount of the multiplication is displayed.
3. Press the [Subtotal w/Tax] key to display the current balance due.
4. Type the amount tendered [1000] and press the
[Amt tend/TOTAL] key. The change due to the customer is
displayed and the transaction is ended successfully.