Operation Manual

1
T O SET IT UP FOR THE TELEPHONE LINE
1. Press the key
until the display shows:
INSTALLATION
2. Press the key:
The display shows:
TEL. LINE SET-UP
3. Press the key:
The display shows:
PUBL.LINE (PSTN)
4. To view the other available option, press the keys:
/ The display shows:
PRIV.LINE (PBX)
5. Press the key:
The display shows:
PBX DIAL:TONE
6. To view the other dialling mode, press the keys:
/ The display shows:
PBX DIAL:PULSE
7. To confirm your choice, press the key:
The display shows:
EXT.LINE:PREFIX
8. To view the other available option, press the keys:
/ The display shows:
EXT.LINE:FLASH
9. To confirm your choice, press the key:
10. Press the key:
The display shows:
PSTN DIAL:TONE
11. To view the other dialling mode, press the keys:
/ The display shows:
PSTN DIAL:PULSE
12. To confirm the setting, press the key:
13. To return the fax machine to its initial stand-by mode, press
the key:
notE
Having confirmed the "EXT.LINE:FLASH" dialling mode to connect to
the public line, simply press the key before dialling the corre-
spondent’s fax or telephone number. The display will show the letter
"E" (external).
T O CONNECT IT TO A PUBLIC LINE
The fax machine is set up to be connected to a public line. In
any case, it is a good idea to check that:
• The "PUBL.LINE (PSTN)" parameter is selected.
• The dialling mode (tone or pulse) is compatible with the
public telephone exchange that manages the line to which
you have connected the fax machine. If in doubt about the
choice to be made, ask your public telephone company.
1. Press the key
until the display shows:
INSTALLATION
2. Press the key:
The display shows:
TEL. LINE SET-UP
3. Press the key:
The display shows:
PUBL.LINE (PSTN)
If the fax machine is set up for connection to the "PRIVATE
LINE", press the
/ keys to select connection to the
"PUBLIC" line. Otherwise, skip to step 4.
4. Press the key:
The display shows:
PSTN DIAL: TONE
Pulse dialling mode may only be selected in some coun-
tries, by pressing the
/ key. In this case, the display
shows:
PSTN DIAL:PULSE
5. To confirm your choice, press the key:
6. To return the fax machine to its initial stand-by mode, press
the key:
T O CONNECT IT TO A PRIVATE LINE ( PBX )
To connect the fax machine to a private line and be able to
use it also on a public line, proceed as follows:
• Select the "PRIV.LINE (PBX)" parameter.
• Set the same dialling mode (tone or pulse) as the one
used by the private telephone exchange that manages the
line to which you have connected the fax machine. If in
doubt about the choice to be made, ask the company that
manages your private telephone network.
• Set the output mode (area code or flash) to access the public
telephone network from the private telephone network.
• Set the same dialling mode (tone or pulse) as the one
used by the public telephone exchange.