Operation Manual

24
5. To view the other available values, "TX SPEED 9.6" and
"TX SPEED 4.8", press the keys:
/
6. To confirm your choice, press the key:
7. To return the fax machine to its initial stand-by mode, press
the key:
TO ENABLE/DISABLE ECM
The ECM (Error Correction Mode) is a system for cor-
recting the errors caused by interference on the line. This
function only has effect if it has been enabled both on your
fax machine and on your correspondent's fax machine and
is indicated by a letter "E" appearing on the display.
The fax machine is set up to send documents in this mode.
However, you can set it up to send documents in normal
mode, as follows:
1. Press the key
until the display shows:
FAX SET-UP
2. Press the key:
The display shows:
DATE AND TIME
3. Press the key:
The display shows:
VARIOUS SETTINGS
4. Press the key:
The display shows:
ECM: ON
5. To view the other available option: "ECM: OFF", press the
keys:
/
6. To confirm your choice, press the key:
7. To return the fax machine to its initial stand-by mode, press
the key:
R ECEIVING A DOCUMENT IN POLLING MODE
FIRST OF ALL, WHAT POLLING IS
It is a transmission request that a fax machine makes to another fax
machine so that the latter sends the document requested automati-
cally.
There are two main characteristics of communication using the polling
method:
• the user who is to receive the document requests trans-
mission. In other words, a user may connect to another fax
machine and request it to send a document (specially prepared) to
him, even when the user at the other end of the line is out.
• the transaction is paid for by the person who requested
transmission (that is, the user who receives the document) and
not the person whose fax machine sends the document.
TO MAKE A TRANSMISSION REQUEST (POLLING RECEPTION)
Arrange with your correspondent the time at which you
intend to make the transmission request so that he has time
to put the document to be sent in his fax machine. Then set
up your fax machine to receive the document, by program-
ming the dialling mode to be used to call your correspond-
ent and the time at which you wish to receive the document.
1. Press the key
until the display shows:
POLLING RX
2. Press the key:
The display shows:
TYPE TIME
HH:MM
At this point, you can confirm the current time or overwrite
the time with the correct one, for example "18:20".
3. To overwrite the new time, press the keys:
-
4. To confirm both the current time and the new time, press the
key:
The display shows:
TYPE FAX NUMBER
NUM/TOUCH/SPEED
5. Dial the correspondent's number using any of the available
methods: directly on the numeric keypad or using the one-
touch dialling keys or speed dialling codes.
To do this, press the keys:
-
6. To confirm the setting, press the key:
The fax machine shows the message "POLL SET" for a few
seconds and then returns automatically to its initial stand-by
mode. The second line of the display shows: "POLL. RX:
18:20".