Operation Manual

II
A BOUT THE FAX MACHINE
C ONSOLE
• Dial the fax or telephone number.
• If pressed for more than a second, they automatically dial
(once set) the telephone or fax number assigned to them
(one-touch dialling function).
• Enter numeric data.
• Select digits and alphanumeric characters during the en-
try of numbers and names.
"Error" LED indicator
Signals an operating fault during transmission or
reception.
Blinking, indicates that the memory contains docu-
ments that have not been printed.
Off, indicates that the memory is empty.
MODELS WITH A BUILT-IN TA D ONLY
On, indicates that there are messages or memos in the
memory that have already been played.
Blinking, indicates that the memory contains docu-
ments that have not been printed, messages or memos
that have not been played.
Off, indicates that the memory is empty.
With the handset lifted, gives access to the special func-
tions made available by the network manager and com-
monly known as REGISTER RECALL (R function).
• Scroll "forwards" and "backwards" through the values of a
parameter.
• Move the cursor to the "right" and to the "left" while entering
numbers and names.
MODELS WITH A BUILT-IN TAD ONLY
• Used to perform TAD functions. Described in the correspond-
ing chapter.
Display
A two-line liquid crystal display with a capacity of 16 characters
per line.
Shows operator prompts and error messages.
• After the button has been pressed, it turns
the speaker volume "up" or "down".
• With tone dialling, they send a tone
down the line for special network serv-
ices.
• They scroll "backwards" and "for-
wards" through characters and spe-
cial symbols during the entry of
names.
The specific keys of the models with TAD are described under the item “ MODELS WITH A BUILT-IN TAD ONLY ”.