Operation Manual

PROGRAMMING

2. Press START to access the menu.

3. Press the

∨∨ key once to select the “Sender’s name”

function.

4. Press START to start storing the name, e.g. P.I.S.A.

S.p.A..

Each character is entered by pressing the

∨∨ or ∧∧ key

to scroll through the entire set of alphanumeric

characters until the desired character is displayed and

then by pressing the > key to confirm selection. The

character to be selected appears in the top right-hand

corner. (For a complete list of the alphaumeric

characters available, refer to the “CHARACTER SET

TABLE” chapter).

If you make a typing error, delete the entire setting by

pressing CLEAR.

5. To confirm the name set, press SET/CONF.

Having stored the sender’s name, the facsimile is

automatically set for programming the next function.

Move straight on to step 4 of the “SETTING

PASSWORDS” section, if you want to continue

programming the remaining functions on the menu, or:

press STOP twice to quit the menu.

D A T A E N T R Y

D A T E / T I M E

D A T A E N T R Y

S E N D E R ’ S N A M E

S E N D E R ’ S N A M E A

S E N D E R ’ S N A M E .

P . I . S. A . S . p . A .

D A T A E N T R Y

T X P A S S W O R D

cap06.p65 13/04/00, 22.2032