Operation Manual

102
Status Monitor
The Status Monitor is a MFP utility that monitors and displays the current status of connected devices.
Upon activation of Windows, the icon of the status monitor appears on the System Tray.
The Status Monitor indicates the device status by icon lamp color as listed below.
NOTE
1.
If the power of the device is not turned on or the parallel cable is not connected when starting
Windows, the error message shown above appears.
Verify the power source and parallel cable and then press the button.
2. Connecting the device to a network server disables the status monitor.
Task Bar Display
Lamp color Status
Blue Device is operational under standby, printing, copying status.
Yellow Device inspection is required under initialization, paper supply, open cover,
paper jam, etc.
Red Need for toner cartridge replacement, or device failure.
Gray Device is in Engergy Saver (Sleep) Mode.
Status Monitor
Retry