Operation Manual

107
Configuration Editor
This utility allows you to edit the machine configuration through the Parallel Port connected between the PC
and the device.
Startup Windows, and select Document Management System
→ MFP Utilities → Configuration Editor from
the Programs in the Start menu to display the configuration editor dialog box.
Each setting category appears as a folder on the left frame and the setting item appears on the right frame.
Main Window
If the device is turned "Off" or not connected, a dialog box
appears as below. You may select.
• Retry
After turned "On" the power or connected the device.
• Work Off-Line
Edit the data from an existing file.
• Exit
Exit the program.
When there is more than 1 supported model series installed,
a "Browse for Folder" dialog box appears as below.
• Select the model series folder and click OK.