User manual

Installing the Camera
23
D
10. Final Steps
Now complete the final steps of the installation work.
Reconnect the two cable connections previously
disconnected.
Using a Receiver
1. Connect the plug (17) on the receiver to the
port (12) on the connection cable of the camera to en
able data exchange with the alarm system.
2. Connect the plug (15) on the receiver to the
port (13) on the connection cable of the camera to
provide the power supply.
3. Connect the plug on the power adapter to the port (16)
on the receiver.
4. Lay the connection cable (1) through the left-hand
cable gland into the cable box.
5. Position the receiver in the cable box as illustrated.
6. Lay the connection cable (1) in loops inside the cable
box.
7. Lay the power cable (20) through the hole drilled in
Step 3 and outdoors from the indoor area.
8. Feed the power cable (20) through the right-hand
cable gland into the cable box.
9. Place the lid (19) on the cable box and screw the
lid (19) in place using the screws provided.
10. Connect the power cable to a properly installed power
socket.