User manual

Installing the Camera

Without Receiver

1. Connect the plug on the power adapter directly to the

port (13) on the camera's connection cable to connect

the power supply.

2. Lay the connection cable (1) in loops inside the cable

box.

3. Lay the power cable (20) through the hole drilled in

Step 3 and outdoors from the indoor area.

4. Feed the power cable (20) through the right-hand

cable gland into the cable box.

5. Place the lid (19) on the cable box and screw the

lid (19) in place using the screws provided.

6. Connect the power cable to a properly installed, indoor

power socket.

11. Aligning the Camera

1. Use the ball joint (21) to align the camera horizontally

and vertically in respect of the area you want to moni

tor.

The camera has an angle of vision of 60°.

2. Check the monitoring position of the camera with the

camera app using the live image.

3. Fix the camera in the defined position using the union

nut (3).

4. The installation and set-up work for the camera is now

completed. You can now start to learn about our con

venient camera app, ProHomeIPC-App.