User manual

15
IP CAMERA IC 600
GENERAL OVERVIEW
Positioning the Camera
When the camera is put into operation for the rst time, it must be
connected to a network connection port (LAN) on your router via the
network cable. Therefore, when putting the camera into operation for
the rst time, it should be located near your router.
After putting the camera into operation for the rst time and
conguring it, you can install the camera at the location where
it should perform the video surveillance. It is essential to
observe local laws and regulations!
Mounting the Camera on the Ceiling
You can mount the camera on any ceiling using the mounting bracket
contained in the package supplied.
1 Use the mounting bracket supplied as the template for the posi-
tion of the holes.
2 Drill two suciently large holes in the ceiling.
3 Insert the dowels in the drill holes.
4 Assemble the mounting bracket using suitable screws.
5 Fit the camera on the mounting bracket. Use the internal thread
on the underside of the camera.