...
Do you need detailed descriptions on how to use the app and operate the camera? Visit us at www.olympia-vertrieb.de Or scan this QR code.
Contents Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 General Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BEFORE YOU START Detailed Operating Instructions . . . . . . . . . . . . . . . . . . . . . . 21 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Guarantee and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Information on Disposal . . . .
SAFETY INSTRUCTIONS Safety Instructions The following warnings indicate potentially dangerous situations which could lead to serious injuries or even fatal injuries if the information is ignored. WARNING! Risk of fatal injury from electric shock! NEVER use the device if you suspect damage to the power cable or power plug or there are visible signs of damage to the power cable or power plug. WARNING! Risk of suffocation! Children can swallow small parts, packaging and protective foils.
SAFETY INSTRUCTIONS CAUTION! This device can be used by children from the age of 8 and persons with restricted physical, sensory or mental capabilities or a lack of experience and knowledge as long as they are supervised or have been instructed with regard to safe use of the device and are aware of the potential risks involved with its use. Children must never play with the device. Cleaning and user maintenance may not be completed by children without any supervision.
SAFETY INSTRUCTIONS IMPORTANT! Only use original accessories. Only connect accessories approved by the manufacturer to the camera and only us the power adapter supplied. IMPORTANT! Repairs to this device may only be completed by properly qualified service personnel. Intended Use The IP camera (subsequently referred to as camera) is designed to perform video surveillance (CCTV) by day and night.
SAFETY INSTRUCTIONS manual is observed and maintained. Any other use is considered unintended use. The camera is not suitable for use in potentially explosive areas. Monitoring of third-parties is not permitted without having obtained the respective, explicit authorisation and could have legal consequences. Unauthorised modifications or reconstructions are not permitted.
GENERAL OVERVIEW General Overview This section provides information on the package contents of the camera, the system requirements to operate it with the ProHomeIPC app and contains a summary of the functions and operating elements available on the camera. Package Contents Please check the contents of the package carefully. If anything is missing or has been damaged during transport, DO NOT put the camera into operation! IP Camera OC 800 1 Power adapter 1 Holder 1 Network cable 1 x Cat.
GENERAL OVERVIEW Camera 5 4 6 7 1 2 3 8 1 2 3 4 Brightness sensor Infrared LED Lens WLAN receiving antenna 10 IP-KAMERA OC 800
GENERAL OVERVIEW 5 6 7 8 Power adapter connection port Reset key Network connection (LAN) Holder System Requirements You need a web-capable smartphone which has the Android (from 4.4) or iOS (from 7) operating system and the latest version of our ProHomeIPC app.
CONNECTING THE CAMERA Connecting the Camera This section provides information on how to connect and position the camera. To simplify set-up and installation, we recommend that you firstly connect your camera to your home network. When the camera is put into operation for the first time, it must be connected to a network connection port (LAN) on your router via the network cable. Therefore, when putting the camera into operation for the first time, it should be located near your router.
CONNECTING THE CAMERA This operating manual describes the sequence of working steps recommended by us: 1 Connecting the Camera 2 Connecting the Camera - Network Cable 3 Installing the ProHomeIPC App 4 Establishing a Connection 5 Last Steps Prior to Assembly 6 Determining the Installation Location 7 Installing the Camera 8 Aligning the Camera IP-KAMERA OC 800 13
CONNECTING THE CAMERA 1. Connecting the Camera 1 Connect the power cable to the power connection port and a properly installed power socket. 2. Connecting the Camera - Network Cable Connect the network cable to the network connection port on the camera and a free network connection port (LAN) on the router. One LED on the network connection port signals when a connection exists to the network (lights up orange) and the other that data is being transmitted (flashes green).
CONNECTING THE CAMERA 3. Installing the ProHomeIPC App 1 Download the ProHomeIPC app from the App Store or Google Play Store. 2 Enable the ProHomeIPC app access to the camera of your smartphone or tablet PC and mobile internet. This simplifies connecting the camera and ProHomeIPC app and also provides remote access to the camera via the smartphone or tablet PC. If you want to scan the QR code, you require access to the camera on your smartphone or tablet PC.
CONNECTING THE CAMERA 4. Establishing a Connection The following conditions must be fulfilled in order that you can use the camera: • • • 1 2 3 4 You have downloaded the ProHomeIPC app and installed it on your smartphone or tablet PC. You have positioned and connected the camera. Your smartphone or tablet PC is in the same network as the camera. Start the ProHomeIPC app. Touch Add Device or Click here. Touch QRCode or Scan. Scan the QR code on the rear of the camera using your smartphone or tablet PC.
CONNECTING THE CAMERA If you touched the Scan option in Step 3, the ProHomeIPC app automatically searches for all the cameras available in the network. If your smartphone or tablet PC is connected within the same network as the camera, the camera is displayed (together with the unambiguous user identifier and IP address). 5 Enter the camera's password. When the default settings are set, the password is admin. 6 Touch Save or OK. Your camera is now listed in the overview of cameras available.
CONNECTING THE CAMERA 5. Last Step Prior to Assembly Disconnect all the cable connections before beginning with the installation work. The settings for the connection between your camera and the ProHomeIPC app and the settings for your WiFi are retained when the camera is disconnected from the power supply. 1 Disconnect the power adapter from the power socket. 2 Disconnect the network cable from the port on the connection cable. 6.
CONNECTING THE CAMERA Â The camera must be installed at a suitable height to protect the camera and connection cable from any unwanted manipulation, vandalism or other unauthorised access. Â The camera must be within the range of the wireless home network (WLAN). Â The power socket, which is located indoors, must be easily accessible. 7.
CONNECTING THE CAMERA We recommend the use of special dowels according to the properties of the mounting surface. 3 4 5 Insert the dowels in the drill holes. Assemble the mounting bracket using suitable screws. Fit the camera on the mounting bracket. Use the internal thread on the underside of the camera. 8. Aligning the Camera 1 2 3 4 20 Aim the camera at the area you want to monitor. Check the monitoring position of the camera with the ProHomeIPC app using the live image.
DETAILED OPERATING INSTRUCTIONS Detailed Operating Instructions The way to use the ProHomeIPC app and operate the camera is explained in the detailed operating manual. The detailed operating manual is available on our website at www.olympia-vertrieb.de. Appendix Technical Data Weight Approx. 306 g Dimensions (W x H x D) Permissible ambient conditions Transmission frequency Transmission power (max.) Power supply 76 x 53 x 103 mm -0 °C to +55 °C at 20% to 85% rel. humidity 2.4 GHz (WLAN) 63.
APPENDIX Lens / Sensor 1/4" CMOS sensors (colour) Resolution 1280 x 720 Pixel Image compression H.264 Light sensitivity 0.5 lux Image refresh rate 30 fps (max.) Night vision 1 IR LED, range up to 10 meters Angle of vision 60° Motion detection Yes Microphone / LoudspeakYes / Yes er 10 Base-T Ethernet / 100 Base-TX LAN / WLAN Fast Ethernet / 802.11 b, 802.11 g, 802.
APPENDIX Troubleshooting My camera is not detected within the network. Check all the cable connections. Observe the information in Section “Connecting the Camera”. Check the network settings. The DHCP function must be activated in the router. Your camera can only be found automatically in the network when the DHCP function is switched on. Reset your camera to its default factory settings. Use a thin object to press in the opening on the rear of the camera for approx. 10 seconds.
APPENDIX My camera does not respond at all or only very slowly to input via the ProHomeIPC app. The connection to the network is slow or faulty. Check the network settings. The mobile internet connection available is of different quality in different localities. Move to a different location and try again. The data volume is used up within the scope of your mobile phone contract and the speed of the mobile connection has been slowed by your provider. Contact your mobile phone provider.
APPENDIX Guarantee and Service Dear Customer, we are pleased that you have chosen this equipment. In the case of a defect, please return the device together with the receipt and original packing material to the point-of-sale. Information on Disposal The adjacent symbol indicates that old electrical and electronic apparatus no longer required must be disposed of separate from domestic waste in accordance with legal directives. Packaging materials must be disposed of according to local regulations.
APPENDIX Cleaning and Service 1 2 Disconnect the camera from the power outlet before cleaning it! Clean the surface of the housing with a soft, lint-free cloth. Never use any chemicals or scouring agents. Information on Conformity Olympia Business Systems Vertriebs GmbH, Zum Kraftwerk 1, 45527 Hattingen hereby declares that these devices fulfil the basic requirements and other relevant provisions stipulated in the Directive 2014/53/EU. The CE Mark on the devices confirms conformity.
APPENDIX Legal Notice Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android is a trademark of Google Inc. Google Play is a trademark of Google Inc.
Download the ProHomeIPC app: v1.0, 08.2017 Art. No.
