Operation Manual

5/619/2400 (13)
Programming
39
Programming
The cash register CM 1712/1736 is programmable and, therefore, can be adapted
for individual requirements. Programming the cash register is divided into several
areas.
The basic program (flags) serves for setting general features such as date and tax
rate format.
The department program serves for allocating the different departments with prices
and assignments. In addition, the coupon function can be programmed.
The Price Look-Up (PLU) program serves for providing the different items with
prices and assignments.
You can enter four different tax rates by means of the tax rate program.
■
■■
■
General notes
Note:
When programming the settings (switch key position P), all entries can be
corrected by pressing < before they are stored with /.
Caution!
With the switch key in position P and using the following combination of keys, the
day’s turnover, the master total and all programmed settings (departments, items
(PLUs), flags, etc.) are deleted.
Key switch in position P
! The display shows CLEAR
/ All settings and sales numbers are deleted
Using the following combination of keys, all programmed settings (departments,
items (PLUs), etc.) are deleted and reset to the original setting.
7 The display shows DEFAULT
/ The department and item prices are reset
Using the following combination of keys, the master total is deleted. This step can
only be carried out if a full Z report was printed first!
) The display shows CLEAR
/ Master total is deleted